Cisco TelePresence SX10 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Sistema de conferencias Cisco TelePresence SX10. Cisco TelePresence SX10 34 páginas. In-room control on touch 10
También para Cisco TelePresence SX10: Manual de instalación (8 páginas), Manual del usuario (26 páginas), Manual rápido (2 páginas), Manual del usuario (34 páginas), Manual del usuario (29 páginas), Manual de usuario preliminar (9 páginas), Manual del usuario (38 páginas), Manual de instalación (8 páginas), Manual del usuario (2 páginas), Manual del usuario (37 páginas), Manual (45 páginas), Manual (45 páginas), Manual de instalación (2 páginas), Manual del usuario (5 páginas), Manual del usuario (38 páginas), Manual del usuario (38 páginas), Manual de introducción (46 páginas), Manual rápido (2 páginas)

Place Call

Place Call Using Name, Number or Video Address

Make sure Call (the leftmost icon along the bottom of the

screen) is selected and press OK on the remote control

or press the green Call button on the remote control.

To enter numbers just press the corresponding keys on

the remote control.

Then press the green Call button to place the call.

Use the up Cursor key to select the Search or Dial field

at the top of the menu. Press OK.

To use the virtual keyboard, move down to and about the

keyboard and select characters. Press OK to select a

character.

Press the red End Call button on the remote control, or

use the Cursor keys to select End and then press OK to

terminate the call.

About Placing Calls

You may call someone who is not

listed in your list of contacts by

keying in their name, address or

number using the virtual keyboard.

Anyone you have previously called

will appear in the Recents list and

you may then add any of them

to your list of Favorites. This is

described in the section Contacts.

Call Using Video Address

The procedure when using an IP

type video address to call someone

is similar. Just key in the address

and use

(the asterisk button in

the lower left corner on the remote

control) as separator. The system will

interpret this as a valid IP address

separator so that the video address

appears as correctly entered.

D1509708 User Guide

Cisco TelePresence TRC 6

Produced: July 2016 for CE 8. 2