Cisco TelePresence SX20 Manual de instalación

Navegue en línea o descargue pdf Manual de instalación para Sistema de conferencias Cisco TelePresence SX20. Cisco TelePresence SX20 2 páginas. In-room control on touch 10
También para Cisco TelePresence SX20: Juego rápido (8 páginas), Manual de introducción (41 páginas), Manual de introducción (42 páginas), Manual de consulta rápida (2 páginas), Juego rápido (2 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (34 páginas), Manual del usuario (29 páginas), Manual de solución de problemas (37 páginas), Manual de cumplimiento de la normativa e información de seguridad (9 páginas), Manual de instalación (8 páginas), Manual del usuario (38 páginas), Manual del usuario (2 páginas), Manual de consulta rápida (2 páginas), Manual del usuario (37 páginas), Manual (45 páginas), Manual (45 páginas), Hoja de instalación (2 páginas), Manual de instalación (2 páginas), Manual del usuario (34 páginas), Manual del usuario (5 páginas), Manual del usuario (38 páginas), Manual del usuario (38 páginas), Manual de introducción (42 páginas), Manual de referencia (8 páginas), Manual de introducción (46 páginas)

Imprimir página
Cisco TelePresence SX20 Manual de instalación
Installation Guide for Cisco TelePresence SX20 Quick Set
SX20 Quick Set components
y SX20 Codec
y HDMI cable for monitor
(1 default)
y Camera options
y Ethernet cable for LAN
A: PrecisionHD 1080p 12X
B: Precision 40
y VGA to DVI-A cable
for PC connectivity (optional)
y Table Microphone 20
(1 default and 1 optional)
y HDMI to DVI-D cable
for PC connectivity (optional)
y TRC6 remote control and
two AAA batteries
y Camera cable
y Touch 10 controller (optional)
y Power supply and
power cable
y Codec wall mounting kit
(optional)
y Microphone extension cable
(optional)
y Camera mounting bracket
(optional)
In addition to the SX20 Quick Set you must provide a monitor or
projector, and a loudspeaker (external or built-in to the monitor) to
complete your video conferencing system.
Documentation
Cisco Spark: Visit the Cisco Spark help site to find more information
about Spark registered room systems,
http://help.ciscospark.com
Other services: Visit the Cisco web site to find user guides
and compliance and safety information for the product,
http://www.cisco.com/go/sx-docs
78-100554-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Recommended room setup
The following should be regarded as
Camera
guidelines only. Try things out on-site
Place the camera at eye height to
before fixing any mounting positions.
get the best perceived eye contact.
Explore the Cisco Project Workplace
Typically, this is about 1.2 m (4 ft)
to find inspiration and guidelines when
above the floor.
preparing your office or meeting room
Use the camera self view function
for video conferencing,
http://www.
to make sure all participants are
cisco.com/go/projectworkplace
captured by the camera.
Aim for good illumination of a
person's face to avoid shadows. Also
avoid direct light on the monitor to
prevent reflections.
Camera options
Microphones
Option A: PrecisionHD 1080p 12X
Place the microphone(s) as close to
all meeting participants as possible.
Option B: Precision 40
本产品为 A 级 ITE，在其使用说明，铭牌等显著位置中已包含如下内容的声明
(We declare here that the subject product is A class ITE product, and the
following statement is clearly marked in the user manual or nameplate):
EMC Class A declaration
此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种
情况下，可能需要用户对干扰采取切实可行的措施。
WARNING:
WARNING:
This is a class A product. In a domestic environment this
product may cause radio interference in which case the user may be
product may cause radio interference in which case the user may be
required to take adequate measures.
required to take adequate measures.
声明所在位置 (Position of the Declaration):
Snap on the lens hood to
Typical room scenario:
prevent stray light from
Medium to large
meeting room.
disturbing your video
experience.
You can use the optional
70˚
camera bracket to place
the camera on top of the
monitor. Fasten the bracket
to the monitor with Velcro.
The camera snaps to the
magnets on the bracket.
You can use the optional
Typical room scenario:
camera bracket to place
Medium sized
the camera on top of the
meeting room.
monitor. Fasten the bracket
to the monitor with Velcro.
70˚
The camera is fastened to
the bracket with a screw.
Tool: 4 mm Allen Key (not
provided).
A 级声明 (A Class product declaration)
警告
This is a class A product. In a domestic environment this
使用说明 User Manual