Sony BRU-SF10 Manual de instrucciones - Página 5

Navegue en línea o descargue pdf Manual de instrucciones para Videocámara Sony BRU-SF10. Sony BRU-SF10 40 páginas. Hd optical multiplex unit
También para Sony BRU-SF10: Hoja de especificaciones (22 páginas)

Imprimir página

1. Connecting Cables

Notes

• To start the system, first turn on the power of the

BRC-Z330 camera, then turn on the power of the

BRU-SF10 (this unit). Otherwise, the error message

"Communication error Please check connection" may

appear.

• Be sure to configure the same image frequency for

both the BRC-Z330 and this unit. 1080i and 760p

video settings configured on the BRC-Z330 will be

automatically applied to the BRU-SF10.

Location and Function

of Parts

Front

3 4 5

ON/STANDBY

LINK

ALARM

DATA MIX

OFF

A Power switch

Turns on/off the power of this unit. Turn on the

power of the BRC-Z330 camera before you turn on

this unit.

B Power indicator

Off: The unit's power switch is turned off.

Lit orange: The unit is starting up or in sleep mode.

Lit green: The unit is in normal operation.

C LINK indicator

Lit green: The optical fiber connection between the

unit and the camera is normal. (The indicator

lights green after the system starts up.)

Lit red: Check for the following.

• The BRU-SF10 is not properly connected to

the camera via optical fiber cable. Check the

connections, and restart the unit.

• Image frequency settings for the camera and

the BRU-SF10 are different. Check the

settings after turning off the power, and then

restart the unit.

• The camera may be unable to start properly

due to the AC adapter being improperly

connected to the DC IN connector on the

camera. Check that the camera is turned on.

1 2 3 4 5 6 7

1080i

59.94

RS232C

9600bps

720p

RS422

38400bps

HD OPTICAL MULTIPLEX UNIT