DigiTech XC-0430 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Estación meteorológica DigiTech XC-0430. DigiTech XC-0430 7 páginas. Professional wireless rain gauge with 4” lcd
También para DigiTech XC-0430: Manual de instrucciones (18 páginas)

Imprimir página

Total Rainfall SINCE function

Press [ SINCE ] button to display the total rainfall record. The connecting data and year will be shown.

To clear the existing commentary date and reset it to re-start again, press and hold [ SINCE ]. The total rainfall will now

be equal to TODAY rainfall and the unit will start again to collect the rainfall data.

To Select the Measurement Unit for the Rainfall

1. Slide the [ MM/IN ] switch to <MM> position to select millimeter unit.

2. Slide the [ MM/IN ] switch to <IN> position to select inch unit.

HISTORY DATA OF ALL RECORD

Data logger stores and gathered data to display rainfall according to your selected time-scale (current status, past 24

hours, past 31 days, past 52 weeks, past 12 months or past 5 years)

To check history data:

1. Press [ RAIN ] button to select rainfall display modes.

2. Press the [ HISTORY ] button to read the data.

The LCD will display the past indoor temperature & humidity, outdoor temperature, value of rainfall and their time and date.

Hour rainfall

Day rainfall

Week rainfall

NOTE:

The main unit can check the records according to the time and calendar of the clock, i.e. it can check the records of the past, but can not

check the records in the future.

E.g. The main unit recorded data from Jan. 1st, 2012 to Feb. 31st, 2014. Then time is set to be Jan. 1st, 2013. It can only check the data

of 2012.

TEMPERATURE DISPLAY

User may select temperature unit by sliding the [ °C / °F ] switch.

MAXIMUM / MINIMUM MEMORY FUNCTION

To Check the Memory

Press [ MEM ] button repeatedly to check the maximum/minimum records.

Area

Outdoor Temperature

Indoor Temperature

Type of memory

Max.

Min.

Max.

Min.

NOTE:

When maximum or minimum reading is displayed, the corresponding timestamp will be shown.

To Clear Individual Records

While displaying the maximum/minimum records, press and hold [ MEM ] button for 2 seconds to clear the individual record.

Month rainfall

Year rainfall

Indoor Humidity

Hour/Day/Week/Month/Year rainfall

Max.

Min.

Max.

HI / LO ALERT

HI/LO are used to alert you of certain weather conditions. Once activated, the alarm will turn on and red LED starts

flashing when a certain criterion is met. The following are areas and type of alert provided.

Area

Indoor temperature

Indoor humidity

Outdoor temperature

Hour Rainfall

Day Rainfall

NOTE:

* Daily rainfall since midnight.

To Set the HI / LO Alert

1. Press the [ ALERT ] button until the desired area is selected.

2. Use [ UP ] / [ DOWN ] buttons to adjust the setting.

3. Press [ ALERT ] button to confirm and continue to next setting.

To Enable / Disable the HI / LO Alert

1. Press [ ALERT ] button until the desired area is selected.

2. Press [ ALARM ] button to turn the alert on or off.

3. Press [ ALERT ] button to continue to next setting.

NOTE:

1. The unit will automatically exit setting mode in 5 seconds if no key is pressed.

2. When ALERT alarm is on, the alert LED indicator, the area and type of alarm that triggered the alarm will be flashing and the alarm will

sound for 2 minutes.

3. To silence the Alert alarm beeping, press the [ SNOOZE/LIGHT ] button, or let the beeping alarm automatically turn off after 2 minutes.

WIRELESS SIGNAL RECEPTION

No sensor

Signal searching

Strong signal

The wireless sensor is capable of transmitting data wirelessly over an approximate operating of 150m range (line of sight).

Occasionally, due to intermittent physical obstruction or other environment interference, the signal may be weaken or lost.

In the case that the sensor signal is lost completely, you will need to relocate the display main unit or the wireless sensor.

Type of Alert available

HI and LO alert

HI alert

Weak signal

Signal lost