Cisco TelePresence System Codec C90
Contents
Video inputs
All video inputs can not be active at the same
time. Please refer to the Video Input Matrix on
the previous page to see an overview.
Component 1–2 (Y-Pr-Pb)
2 x 3 BNC sockets, analog video input 1, 2.
There are three BNC connectors for each
Component interface; Y (luma), Pr (red), Pb
(blue).
Typical use: Camera, DVD and Content player.
HD-SDI 1–4
4 x BNC sockets, digital video input 1, 2, 3, 4.
Typical use: Cameras.
Composite 5 / S-Video (YC) 5
2 x BNC sockets, analog video input 5.
The S-Video (YC) and the composite inputs
uses the same physical connectors, and will
not be able to be connected at the same time.
•
S-Video 5 - Connect to the Y/Comp 5
(luma) and C 5 (chroma) connectors
•
Composite 5 - Connect to Comp 5
connector
Typical use: Camera and DVD.
D14644.03 Codec C90 Physical Interface Guide TC4.1, February 2011.
© 2010-2011 Cisco Systems, Inc. All rights reserved.
Introduction
Connecting to the codec
4xHD-SDI In
BNC pin-out
External view of socket
Signal
GND
The physical interface
The physical interface
2xComponent
In (YPrPb)
1xComposite
or 1xS-Video (YC)
BNC: Bayonet Neill-Concelman
HD-SDI: High Definition - Serial Digital
Interface
Y-Pr-Pb: Y: Information about luma
(luminance); Pr: Red color; Pb: Blue color
Y-C: Y: Information about luma (luminance); C:
Information about chroma (color)
11
Physical interface guide
Contact us
Levels
HD-SDI
0.8 Vpp, 75 Ω
SMPTE 259M (270 Mbps)
SMPTE 292M (1.485, 1.485/1.001 Gbps)
Y-Pb-Pr
Y: 1V Vpp, 75 Ω
Pb: 0.7 Vpp, 75 Ω
Pr: 0.7 Vpp, 75 Ω
Composite. 1 Vpp, 75 Ω
S-Video (YC)
Y: 1 Vpp, 75 Ω
C (PAL): 0.3 Vpp, 75 Ω
C (NTSC): 0.28 Vpp, 75 Ω
www.cisco.com