Cisco TelePresence VX Clinical Assistant Manual de instalación y uso - Página 28

Navegue en línea o descargue pdf Manual de instalación y uso para Sistema de conferencias Cisco TelePresence VX Clinical Assistant. Cisco TelePresence VX Clinical Assistant 33 páginas. Mobile video system

Imprimir página

Cleaning the System

The surface materials of the VX Clinical Assistant are

durable and easy to maintain.

Please refer to the respective Materials Safety Data

Sheets (MSDS) for detailed descriptions for each

product from its manufacturer.

DuPont

Corian® Solid Surface

www.dupont.com

www.corian.com

Wilsonart® Chemsurf®

www.wilsonartlaminate.com

800-433-3222

141299.21 Cisco TelePresence VX Clinical Assistant

DuPont

Corian® Solid Surface

(light-colored solid material)

General and everyday cleaning can be

done by wiping the surface with a damp

cloth or sponge, then dry with soft cloth

or paper towels. An ammonia-based,

non-abrasive cleaner may be used for

stains.

Disinfect the surface with the appropriate

sterilant or disinfectant.

Prolonged exposure to concentrated, un-

diluted disinfectant solutions may degloss

or etch solid surface material and require

refinishing to restore the surface to its

original condition. Using a wet Scotch-

Brite® pad and bleaching and/or abrasive

cleanser may restore the surface finish.

GENERAL CLEANING:

1. Before cleaning, ensure that the monitor is

turned off.

2. Direct the suction nozzle of vacuum cleaner

to remove dirt/dust accumulated in crevices.

Hand brush may be used to assist in removing

settled dirt/dust.

3. Use cloth dampens with ethyl alcohol to wipe

clean the surfaces. Do not use excessive

alcohol as the disinfectant is flammable.

4. Use 0.1% hypochlorite solution to wipe clean

the surface of CPU or laptop and monitor

casings. Wait for 5 minutes and use another

piece of cloth dampened with water to clean

off residual hypochlorite.

5. The glass surface of video display terminals

with cathode ray tubes may be cleaned and

Wilsonart® Atlantis D525-60

(blue inlaid laminate material)

Clean with warm water and mild

soaps, such as those used for hands

or dishes. Avoid cleansers contain-

ing abrasives, acids, or alkalis.

Stubborn stains may be removed

with a 1.5 minute exposure to hy-

pochlorite bleach (such as Clorox®)

followed by a clean water rinse.

It is recommend that you not allow

any of the following reagents to

remain in contact with the decorative

surface:

1. Hypochlorite bleach, except as de-

scribed above

2. Hydrogen peroxide solution

3. Mineral acids, hydrochloric acid such

as Lime-A-Way™, sulfuric or nitric acid

4. Caustic solutions containing greater

than 2% lye, such as Drano®

5. Sodium bisulfate, such as Sani-Flush®

6. Potassium permanganate

7. Berry juices

8. Silver nitrate, in 1% concentration

9. Gentian violet

10. Mild silver protein, such as 20% Argyrol

11. Bluing

12. Fabric dye, such as Tintex® or Rit®

13. Alcohol containing 1% iodine in solu-

tion.

disinfected using diluted hypochlorite solution.

6. The video display surface of LCD monitor

should be wiped gently using a damp cloth.