DigiTech RP1000 Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Interruptor DigiTech RP1000. DigiTech RP1000 12 páginas. Multi-effects switching system
También para DigiTech RP1000: Manual de inicio rápido (2 páginas)
Imprimir página
MaC InSTaLLaTIon
1.
Insert the DVD into your DVD drive. A new window will open.
Double-click the Cubase LE 4 for Mac oSX icon. A new windows will open.
2.
.
Double-click the Cubase LE 4.mpkg icon and follow the on screen instruc-
tions to install Cubase LE 4.
3. CUBaSE SETUP
a. SET UP WInDoWS
When the USB Audio and MIDI drivers were installed, Windows may have automatically
selected them as your default audio and MIDI outputs. This means that your Windows
sounds will be sent to the RPxxx rather than your computer's sound card. We need to
check if these have been changed and return the settings to what they were before.
1.
Select Start>Control Panel>Sounds and audio Devices (XP) or
Hardware and Sound (Vista).
2.
Select the audio tab (XP) or Manage audio Devices (Vista).
Under Sound Playback>Default device (XP), or Playback (Vista), make
.
sure your computer's sound card is selected as the default device.
4.
Under Sound Recording>Default device (XP), or Recording (Vista), make
sure your computer's sound card is selected as the default device.
5.
Under MIDI Music Playback>Default device, open the pull-down menu and
make sure Microsoft GS Wavetable Synth is selected as the default device (XP
only).
B. CUBaSE
®
1.
After the RPxxx is connected to your computer and powered on, open Cubase
LE 4, and go to Devices>Device Setup as shown below.
2
aUDIo anD MIDI (oPTIonaL)
®
LE 4 DEVICE SETUP foR WInDoWS
®