Cisco 2100 Series Manual de configuración - Página 24
Navegue en línea o descargue pdf Manual de configuración para Hardware de red Cisco 2100 Series. Cisco 2100 Series 50 páginas. Cisco 8500 series
wireless lan controller
También para Cisco 2100 Series: Manual de configuración (40 páginas), Manual de inicio rápido (49 páginas), Manual de inicio rápido (12 páginas)
Imprimir página
Spectralink VIEW Certified Configuration Guide: Cisco Controllers and APs
Network settings
Admin Tip: Data Rates
For setting up the Data Rates, please consult your facility's RF site survey,
designed for voice traffic, to determine if you have sufficient coverage to support all
data rates. Spectralink Wireless Telephones require the following minimum dBm
reading to support the corresponding Mandatory data rate setting in the access
point.
802.11
Radio Standard
802.11b
802.11g
802.11a
802.11n
Web Info: RF Deployment reference
For additional details on RF deployment please see the Deploying Enterprise-
Grade Wi-Fi Telephony White Paper.
In the navigation pane under 802.11b/g/n, click Network. Set network parameters as follows:
1
Set 802.11b/g Network Status to Disable. The radio will be re-enabled after setting radio
parameters.
2
Use the default Fragmentation Threshold (2346 bytes).
3
Set the Beacon Period to 100.
4
Set the 1 Mbps and 2 Mbps settings to Disabled.
5
Click the Apply button to save the settings.
721-1001-000-AH.docx
December 2016
Minimum Available
Signal Strength (RSSI)
-75 dBm
-65 dBm
-67 dBm
-47 dBm
-67 dBm
-50 dBm
-50 dBm
Maximum
"Mandatory" Data Rate
1 Mb/s
11 Mb/s
6 Mb/s
54 Mb/s
6 Mb/s
54 Mb/s
65 Mb/s
24