Cisco 3110 Manual - Página 4

Navegue en línea o descargue pdf Manual para Hardware de red Cisco 3110. Cisco 3110 42 páginas.
También para Cisco 3110: Primeros pasos (42 páginas)

Imprimir página

Deployment Options

Feature

Redundant

power

Fans

Storage

Pullout asset

card

Grounding lug

Power switch

Reset button

Deployment Options

Here are some examples of how you can deploy the Secure Firewall 3100:

• As a firewall:

• As a device that provides additional application control, URL filtering, or IPS/threat-centered capabilities:

Overview

3105

Note

Yes, if you order an extra power supply.

Two dual fan module slots (3 + 1)

The dual fan modules are hot-swappable.

Note

Two Nonvolatile Memory Express (NVMe) SSD slots

Ships with one 900-GB SSD installed in slot 1. You can order a second RAID1 SSD for

slot 2. The RAID1 SSD is preconfigured for RAID1.

Note

Slot 2 is reserved for the optional software RAID1 configuration.

Hot-swapping is supported with 2 SSDs. However, you must enter a CLI

Note

command to remove one disk from the RAID before hot swapping. See the

CLI configuration guide for your software for the procedure.

Displays the serial number and a QR code that points to the low touch provisioning (LTP)

guide.

On rear panel

Resets the system to factory default without requiring serial console access

The reset button is recessed. Press with a pin and hold longer than 5 seconds

Note

to set the system back to the factory default.

• At the enterprise internet edge in a redundant configuration

• At branch offices in either a high availability pair or standalone

• At data centers in a high availability pair or clustered, which serves the needs of smaller enterprises

• Behind an enterprise internet edge firewall in an inline configuration or as a standalone (requires

hardware fail-open network module support)

• Deployed passively off a SPAN port on a switch or a tap on a network, or standalone

3110

3120

Overview

3130

3140

Yes

Ships with two power

Note

supplies.