Cisco 3750G - Catalyst Integrated Wireless LAN Controller Manual de configuración - Página 13
Navegue en línea o descargue pdf Manual de configuración para Hardware de red Cisco 3750G - Catalyst Integrated Wireless LAN Controller. Cisco 3750G - Catalyst Integrated Wireless LAN Controller 40 páginas. Integrated wireless lan controller switch
También para Cisco 3750G - Catalyst Integrated Wireless LAN Controller: Manual de introducción (49 páginas)
Imprimir página
Section 1: SVP
PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
Global settings for
were not tested. For
Assignment
settings please consult your facility's RF site survey — optimized for
wireless voice traffic — to determine correct power and channel
settings for each AP using only channels
4. Set
to
Admin Status
5. Configure any other settings that might be relevant to your
deployment as needed.
6. Click the
button to save all changes.
Apply
Screenshot for 1100, 1130, 1200, 1230 and 1240 series access points:
Screenshot for 1140 and 1250 series access points:
7. In the navigation pane under
8. Set
802.11b/g Network Status
after setting radio parameters.
For setting up the
survey, designed for voice traffic, to determine if you have sufficient
coverage to support all data rates. SpectraLink Wireless
Telephones require the following minimum dBm reading to support
the corresponding
RF Channel Assignment
Custom Tx Power
.
Enable
802.11b/g/n
to
. The radio will be re- enabled
Disable
please consult your facility's RF site
Data Rates,
data rate setting in the access point.
Mandatory
and
Tx Power Level
and
RF Channel
,
and
.
1
6
11
, click
.
Network
13