Argo HIFAN Instrucciones de uso - Página 4

Navegue en línea o descargue pdf Instrucciones de uso para Calentador Argo HIFAN. Argo HIFAN 4 páginas. Ceramic fan heater

Put the fan heater vertically on a flat and stable surface.

On the back of the product there is a lever (A) on which you can press to fix the slope of the heating

surface in one of two possible positions, thus directing the airflow in the room in a different way.

Connect the power cord to a suitable electric socket (230V).

Turn the thermostat knob clockwise in maximum position.

Turn the switch knob, the operation light switches on: select one of the possible positions:

FAN = cool air

LOW = hot air (1000 W )

HIGH = very hot air (1800 W )

The thermostat maintains the desired room temperature switching on and off automatically the appliance.

Leave the appliance working until the comfortable temperature is reached; - turn the knob anti clockwise until you

hear a "click" and the appliance stops; - turn clockwise again the knob (just a little): in this position the thermostat

will maintain the comfortable temperature you have selected.

In case of overheating the safety cut out protecting the heating element will automatically switch off the appliance.

In this case the appliance stops working and the pilot light will remain switched on even if the appliance is not

working. If this happens:

 switch off the fan heater;

 remove the causes of abnormal operation or overheating (i.e. obstacles in front of air inlet or air outlet grille);

 leave the heater cool down for 15/20 minutes;

 switch on again the fan heater.

WARNING:

ALWAYS UNPLUG THE CORD AND LEAVE THE APPLIANCE COOL DOWN BEFORE

MOVING OR SERVICING.

DO NOT IMMERSE HEATER IN WATER.

CLEANING

Use a soft dry cloth to clean the outer surface

Do not use water, oils, chemicals that can damage the surface.

Use a vacuum cleaner to remove dust from the air intake and outlet.

STORAGE

Make the heater cool down, dry and pack well, and then put the product in a dry and ventilated place for stocking.

INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE

2002/96/EC

At the end of its working life this equipment must not be disposed of as an household waste. It must be taken to special local

community waste collection centres or to a dealer providing this service. Disposing of electrical and electronic equipment

separately avoids possible negative effects on the environment and human health deriving from an inappropriate disposal and

enables its components to be recovered and recycled to obtain significant savings in energy and resources. In order to

underline the duty to dispose of this equipment separately, the product is marked with a crossed-out dustbin.

V 06/11

HOW TO USE THE FAN HEATER

(low temperature)

(high temperature)

OVERHEATING SAFETY DEVICE

MAINTENANCE