Cisco AIM-VPN - DES/3DES VPN Data Encryption AIM Module Manual del usuario - Página 12
Navegue en línea o descargue pdf Manual del usuario para Hardware de red Cisco AIM-VPN - DES/3DES VPN Data Encryption AIM Module. Cisco AIM-VPN - DES/3DES VPN Data Encryption AIM Module 23 páginas. Vpn encryption module (aim-vpn/epii, aim-vpn/hpii, aim-vpn/bpii family)
show crypto engine accelerator statistic
show crypto engine accelerator statistic
To display the statistics and error counters for a router's onboard hardware accelerator for IPSec
encryption, use the show crypto engine accelerator statistic command in privileged EXEC mode.
Syntax Description
This command has no arguments or keywords.
Command Modes
Privileged EXEC
Command History
Release
12.1(1)XC
12.1(3)XL
12.2(2)XA
12.2(13)T
12.2(15)ZJ
12.3(4)T
Examples
The following example shows typical output of the current statistics and error counters for the router's
hardware accelerator:
Router# show crypto engine accelerator statistics
Virtual Private Network (VPN) Module in slot :0
Cisco IOS Release 12.3(7)T
12
DES/3DES/AES VPN Encryption Module (AIM-VPN/EPII, AIM-VPN/HPII, AIM-VPN/BPII Family)
show crypto engine accelerator statistic
Modification
This command was introduced for the Cisco 1700 series router and other
Cisco routers that support hardware accelerators for IPSec encryption.
This command was introduced for the Cisco uBR905 cable access router.
Support was added for the Cisco uBR925 cable access router.
This command was integrated into Cisco IOS Release 12.2(13)T and
implemented for the AIM-VPN/EPII & AIM-VPN/HPII on the following
platforms: Cisco 2691, Cisco 3660, Cisco 3725, and Cisco 3745.
This command was implemented for the AIM-VPN/BPII on the following
platforms: Cisco 2610XM, Cisco 2611XM, Cisco 2620XM,
Cisco 2621XM, Cisco 2650XM, and Cisco 2651XM.
This command was integrated into Cisco IOS Release 12.3(4)T.
Statistics for Hardware VPN Module since the last clear
of counters 1379 seconds ago
167874 packets in
201596210 bytes in
121 paks/sec in
1169 Kbits/sec in
0 packets decrypted
0 bytes before decrypt
0 bytes decrypted
0 packets decompressed
0 bytes before decomp
0 bytes after decomp
0 packets bypass decompr
0 bytes bypass decompres
0 packets not decompress
0 bytes not decompressed
1.0:1 compression ratio
20 commands out
Last 5 minutes:
167874 packets out
201596059 bytes out
121 paks/sec out
1169 Kbits/sec out
0 packets encrypted
0 bytes encrypted
0 bytes after encrypt
0 packets compressed
0 bytes before comp
0 bytes after comp
0 packets bypass compres
0 bytes bypass compressi
0 packets not compressed
0 bytes not compressed
1.0:1 overall
20 commands acknowledged