Sony Power HADFX HDC-P1 Manual de instrucciones - Página 30
Navegue en línea o descargue pdf Manual de instrucciones para Cámara digital Sony Power HADFX HDC-P1. Sony Power HADFX HDC-P1 36 páginas. Hd multi purpose camera
También para Sony Power HADFX HDC-P1: Folleto (36 páginas), Folleto (4 páginas), Folleto (4 páginas), Folleto (2 páginas)
Imprimir página
Inserting a "Memory Stick Duo"
Insert a "Memory Stick Duo" with the label side facing left into
the "Memory Stick Duo" slot until it clicks and the access lamp
lights in red.
When the "Memory Stick Duo" is properly set, the lamp lights
in green.
Access lamp
Note
If it does not fit into the slot properly or if there is some
resistance when you insert it, the "Memory Stick Duo" may be
turned around or upside-down. Do not force the "Memory Stick
Duo" into the slot. Confirm the direction of the notch and arrow
on the "Memory Stick Duo" before inserting the "Memory Stick
Duo," and then try inserting it again.
Removing a "Memory Stick Duo"
Confirm that the access lamp is not lit in red, then lightly push
in the "Memory Stick Duo" to release the lock.
Note
If the access lamp is lit in red, data is being read from or written
to the "Memory Stick Duo" At this time, do not shake the
product or subject it to shock. Do not turn off the power to the
product or remove the "Memory Stick Duo." Doing so may
damage the data.
Protecting saved data
To prevent accidental erasure of important setup data, use the
LOCK switch on the "Memory Stick Duo."
Slide the switch upward to the write protect position.
This ensures that you cannot inadvertently overwrite data on
the "Memory Stick Duo."
LOCK switch
Note
The "Memory Stick Duo" does not have a LOCK switch. When
using "Memory Stick Duo" media, be careful not to
inadvertently overwrite or erase your data.
Precautions
• Do not attach anything other than the supplied label to the
"Memory Stick Duo" labeling position.
• Attach the label so that it does not stick out beyond the
labeling position.
• Carry and store the "Memory Stick Duo" in its case.
• Do not touch the connector of the "Memory Stick Duo" with
anything, including your finger or metallic objects.
30
Appendices
Label side
"Memory Stick Duo"
• Do not strike, bend, or drop the "Memory Stick Duo."
• Do not disassemble or modify the "Memory Stick Duo."
• Do not allow the "Memory Stick Duo" to get wet.
• Do not use or store the "Memory Stick Duo" in a location that
is:
— Extremely hot, such as in a car parked in the sun
— Under direct sunlight
— Very humid or subject to corrosive substances
• To prevent data loss, make backups of data frequently. In no
event will Sony be liable for any loss of data.
• Unauthorized recording may be contrary to the provisions of
copyright law. When you use a "Memory Stick Duo" that has
been pre-recorded, be sure that the material has been
recorded in accordance with copyright and other applicable
laws.
• "Memory Stick" and
are trademarks of Sony Corporation.
• "Memory Stick Duo" and
Sony Corporation.
• "Memory Stick PRO Duo" and
trademarks of Sony Corporation.
Specifications
General
Power requirements
DC 10.5–17V, 24W (not including
peripherals)
Operating temperature
–20 °C to +45 °C (–4 °F to +113 °F)
Storage temperature
–20 °C to +60 °C (–4 °F to +140 °F)
Mass
Approx. 1.7 kg (3 lb 12 oz) (camera
head only)
Imager
Imager
2/3-type Progressive Scan CCD
Method
3-CCD, RGB
Effective resolution
1920 (horizontal) × 1080 (vertical)
Electrical characteristics
Sensitivity
f10.0 with 59.94 Hz/f11.0 with 50.00 Hz
(at 2000 lx with 89.9% reflectivity)
Image S/N
HD output: Typical 55 dB
SD output: Typical 65 dB (59.94 Hz)
Horizontal resolution
HD: 1000 TV lines (at center of screen)
5% or higher modulation
Geometric distortion
Negligible (not including lens distortion)
Optical system specifications
Spectral system
F1.4 prism
Built-in filters
Color temperature conversion filters
A: Cross filter
B: 3200K (clear)
C: 4300K
D: 6300K
ND filters
1: Clear
2: 1/4 ND
3: 1/16 ND
4: 1/64ND
are trademarks of
are
(NS Max. 62 dB)
Typical 63 dB (50.00 Hz)