Cisco Aironet 340 Series Manual de inicio rápido - Página 5
Navegue en línea o descargue pdf Manual de inicio rápido para Hardware de red Cisco Aironet 340 Series. Cisco Aironet 340 Series 12 páginas. Usb client adapter
También para Cisco Aironet 340 Series: Manual de inicio rápido (12 páginas), Manual de inicio rápido (13 páginas), Notas de publicación (14 páginas), Manual de inicio rápido (16 páginas), Manual de inicio rápido (12 páginas)
Imprimir página
10Base2
connector
Attaching 10Base2 Cabling
1
Attach the 10Base2 (Thinnet) cabling to
a BNC T-connector.
2
Attach the T-connector to the 10Base2
connector on the bridge.
3
If the unit is at the end of the Ethernet
cable, install a 50-ohm terminator on
the open end of the T-connector.
Caution
Removing a terminator
to install extra cable or breaking an
existing cable to install a
T-connector will cause a disruption
in Ethernet traffic. Consult your
LAN administrator before you
change any Ethernet cable
connections.
10 B as e
1 0 B a s e
2
1 0 B a s e
2
1 0 B a s e
5
10Base5
connector
2
10 B as e
5
1 0B as e
T
1 0 B a s e
10BaseT
connector
Attaching 10Base5 Cabling
1
Attach the transceiver connector to the
10Base5 (Thicknet) port.
2
Slide the locking mechanism into place.
3
Attach the other end of the transceiver
drop cabling to an external transceiver.
Attaching 10BaseT Cabling
1
Plug the RJ-45 connector into the
10BaseT (twisted pair) port.
2
Connect the other end of the twisted
pair cabling to the 10BaseT Ethernet
LAN connection.
5
1 0 B a s e
T
3