Sony XC-ST50 Manual técnico - Página 22

Navegue en línea o descargue pdf Manual técnico para Cámara digital Sony XC-ST50. Sony XC-ST50 31 páginas. Black-and-white video camera module
También para Sony XC-ST50: Especificaciones (4 páginas), Manual del usuario (31 páginas), Manual del producto (2 páginas), Manual técnico (30 páginas), Manual (4 páginas)

Imprimir página
Sony XC-ST50 Manual técnico
XC-ST50/50CE
XC-ST30/30CE
TIMING CHART OF EXTERNAL TRIGGER SHUTTER - MODE 1 (NON-RESET MODE)
For setting the shutter speed using DIP switch
HD/VD input
• Continuous HD/VD input
1
1
100 µs to 250 ms
*
Trigger
2
*
Exposure time
1
*
External HD
1
*
External VD
(Continuous
VD)
4
*
T : T = Under 10 ms
Video out
WEN
1: This is a signal input from external equipment. The period of a continuous VD signal is prescribed as one
*
field. Both HD and VD signals must be input.
2: As shown in the table on page 7, exposure time Te is determined by the DIP switch setting.
*
3: Normal operation is engaged when the high period exceeds 1/3 sec. After that, the external trigger shutter
*
operation is engaged when the trigger pulse goes "low". In this case, the area between the falling edge of
a trigger pulse and the subsequent 50 ms period is an external input inhibition area. During the trigger
inhibit period, an input trigger may be missed.
4: An image is output when an external VD signal falls 10 ms or more after a trigger pulse rises (shown by 2
*
and 3 in the figure). If the time (T in the figure) between the falling edges of a trigger pulse and external
VD signal is under 10 ms, an image is output when the external VD signal or the next external VD signal
falls (as shown by 1 in the figure). (In this case, an image is output when the next external VD signal falls.)
An image and WEN signal are always output together. For more details, refer to the WEN signal.
Note
: An image is superimposed when the next exposure ends before the previous image is output.
20
External trigger shutter operation
2
2
*
Te
Exposure time
4
*
T : T = 10 ms or more
1
250H (XC-ST50/30)
250H (XC-ST50/30)
293H (XC-ST50CE/30CE)
293H (XC-ST50CE/30CE)
3
*
Normal operation
1/3 s or more
Te
2
Mode transition
External input
External trigger
inhibition area
shutter operation
(50 ms)
3
2
*
Exposure
time
Te
4
*
T : T = 10 ms or
more
3