Sony XCG-CG160 Manual - Página 8

Navegue en línea o descargue pdf Manual para Cámara digital Sony XCG-CG160. Sony XCG-CG160 9 páginas. Digital video camera
También para Sony XCG-CG160: Manual (9 páginas)

Imprimir página

White Balance ( XCG-CG510C/CG240C/CG160C )

The white balance can be automatically adjusted when the

BalanceWhiteAuto command is executed. The detection area is

set to the screen center by default. The detection area can also be

displayed on the screen.

The detection frame can be changed arbitrarily (DetectAreaWBAuto).

For manual correction, the GainDigital should be changed.

GPIO

GPI

The signal level which is input in the 2nd, 3rd, and 4th* DC IN

connector can be detected. After selecting a connector by

LineSelector register, the signal level is acquired from LineStatus

* Only output is available for XCG-CG160/CG160C

GPO

Various signals can be output from the 3rd and 4th DC IN

connector. After selecting a connector by LineSelector register

and setting LineMode to Output, LineSource is set. The output

polarity is set by LineInverter register.

Parameter

Line 1 (0)

LineSelector

Line 2 (1)

Line 3 (2)

Input (0)

LineMode

Output (1)

Off (0)

LineInverter

On (1)

LineStatus

TriggerThrough (0)

ExposureActive (2)

StrobeActive (3)

SensorReadout (4)

UserOutput 1 (5)

LineSource

UserOutput 2 (6)

UserOutput 3 (7)

SignalTrue (8)

SignalFalse (9)

PWM (10)

Setting example:

The strobe control signal is output to GPO2 (DC IN connector 3rd pin)

by Hi active setting.

LineSelector = 1

LineMode = 1

LineInverter = 0

LineSource = 3

Memory shot

Memory shot is a function that controls the exposure timing and

image output to the network individually.

This is effective when multiple cameras are connected to the

same network and it is necessary to expose them at the same

time in a configuration that exceeds 1 Gbps band when operated

simultaneously.

Memory shot is available in multi-frame mode or single-frame

mode.

Number of images that can be saved is determined by image size

and pixel format.

Exposure start

Exposure

Imager readout

Camera output

2018

Setting

DC IN connector 2nd pin

DC IN connector 3rd pin

DC IN connector 4th pin

Set to output

Input setting

Without output inversion

With output inversion

Input signal level

Trigger through signal

Exposure signal

Strobe control signal

Sensor readout signal

User definition 1

User definition 2

User definition 3

Level H

Level L

Pulse generation signal

Sending of command

Reached the specified amount Event issued

Output timing control

Normally, images are sequentially output when exposure ends, but

the image output start timing can be delayed.

Optimal when requiring simultaneous exposure, but there are

several cameras connected to the same network and the

configuration makes the bandwidth exceed 1Gbps when operated

simultaneously.

Optimal when shooting 1 shot with single frame or trigger.

Exposure

Imager readout

Cam1

Camera output

Exposure

Imager readout

Cam2

Camera output

XCG-CG510/CG510C/CG240/CG240C/CG160/CG160C