Sony XCU-CG160 Manual técnico - Página 28
Navegue en línea o descargue pdf Manual técnico para Cámara digital Sony XCU-CG160. Sony XCU-CG160 45 páginas. Digital video camera module
Imprimir página
GPIO
GPI
The signal level which is input pin 2 and pin 3 of the DC
power supply input connector can be detected. After
selecting a connector using LineSelector, the signal level
is acquired from LineStatus.
GPO
Various signals can be output from pin 3 and pin 4 of the
DC power supply input connector. Select a connector
using LineSelector, set LineMode to Output, and set
LineSource. The output polarity is set by LineInverter.
Feature
Parameter
LineSelector
Line1 (0)
Line2 (1)
Line3 (2)
LineMode
Input (0)
Output (1)
LineInverter
False (0)
True (1)
LineStatus
LineSource
TriggerThrough (0) Trigger through
ExposureActive (1) Exposure signal
StrobeActive (2)
SensorReadout (3)
UserOutput0 (4)
UserOutput1 (5)
UserOutput2 (6)
SignalTrue (7)
SignalFalse (8)
PulseGenerator (9)
Setting example:
The strobe control signal is output on GPO2 (pin 3 of
the DC power supply input connector, active-High).
LineSelector = Line2
LineMode = Output
LineInverter = False
LineSource = StrobeActive
Setting
Pin 2 of the DC
power supply input
connector
Pin 3 of the DC
power supply input
connector
Pin 4 of the DC
power supply input
connector
Set to input
Set to output
Without output
inversion
With output inversion
Input signal level
signal
Strobe control signal
Sensor readout signal
User definition 0
User definition 1
User definition 2
H level
L level
Pulse generator signal
28