Argo STANDY EVO Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Ventilador Argo STANDY EVO. Argo STANDY EVO 10 páginas. Floor fan
Imprimir página
SWING BUTTON
To activate or deactivate the swing function, press the button
control.
It is possible to adjust the angle of inclination of the fan assembly. Turn off the fan, slightly loosen the adjustable screw by
turning it counter-clockwise. Place the fan assembly in the desired angle, then tightly screw the adjustable screw by turning
it clockwise.
TIMER BUTTON
Press the button
on the control panel or the TIMER button on the remote control to select the fan shutdown interval in
the following sequence: 1 hour, 2 hours, 4 hours up to a maximum of 7 hours. The LEDs on the control panel will light up
according to your selection.
MODE BUTTON
There are 3 operating modes:
1. Normal: constant speed. It is activated automatically when the unit is turned on.
This is the corresponding icon
It is possible to select one of the 3 ventilation speeds.
2. Natural: must be selected by pressing the button
The LED relating to the corresponding icon
The operation will alternate moments at low, medium, high speed and stop, according to a predefined and different
program according to the selected fan speed.
3. Sleep: must be selected by acting twice on the button
The LED relating to the corresponding icon
It is possible to select one of the 3 ventilation speeds.
The operation will alternate moments at low, medium, high speed and stop, according to a predefined and different
program according to the selected fan speed.
V 01/21
on the control panel or the SWING button on the remote
on the control panel or remote control once.
will turn on.
on the control panel or remote control
will turn on.
19