Cisco ASA 5506W-X Manual de software - Página 15

Navegue en línea o descargue pdf Manual de software para Hardware de red Cisco ASA 5506W-X. Cisco ASA 5506W-X 37 páginas. Threat defense reimage guide
También para Cisco ASA 5506W-X: Manual de inicio rápido (10 páginas), Manual de configuración (13 páginas), Manual de inicio rápido (14 páginas), Manual de instalación sencilla (11 páginas), Montar y conectar (12 páginas), Manual de instalación (46 páginas), Montar el chasis (10 páginas)

Cisco ASA 5506W-X Manual de software
Cisco ASA and Firepower Threat Defense Reimage Guide
sync
tftpdnld
The ASA image downloads and boots up to the CLI.
See the following information:
• interface—(ASA 5512-X, 5515-X, 5525-X, 5545-X, and 5555-X only) Specifies the interface ID. Other
models always use the Management 1/1 interface.
• set—Shows the network settings. You can also use the ping command to verify connectivity to the server.
• sync—Saves the network settings.
• tftpdnld—Loads the boot image..
Example:
Example for the ASA 5555-X:
rommon 2 > interface gigabitethernet0/0
rommon 3 > address 10.86.118.4
rommon 4 > netmask 255.255.255.0
rommon 5 > server 10.86.118.21
rommon 6 > gateway 10.86.118.1
rommon 7 > file asalatest-smp-k8.bin
rommon 8 > set
ROMMON Variable Settings:
ADDRESS=10.86.118.3
NETMASK=255.255.255.0
SERVER=10.86.118.21
GATEWAY=10.86.118.21
PORT=GigabitEthernet0/0
VLAN=untagged
IMAGE=asalatest-smp-k8.bin
CONFIG=
LINKTIMEOUT=20
PKTTIMEOUT=4
RETRY=20
rommon 9 > sync
Updating NVRAM Parameters...
rommon 10 > tftpdnld
Example for the ASA 5506-X:
rommon 2 > address 10.86.118.4
rommon 3 > netmask 255.255.255.0
rommon 4 > server 10.86.118.21
rommon 5 > gateway 10.86.118.21
rommon 6 > file asalatest-lfbff-k8.SPA
rommon 7 > set
ROMMON Variable Settings:
ADDRESS=10.86.118.3
NETMASK=255.255.255.0
SERVER=10.86.118.21
GATEWAY=10.86.118.21
VLAN=untagged
Reimage from Firepower Threat Defense to ASA
Cisco ASA and Firepower Threat Defense Reimage Guide
15