Sony MHC-GPX8 Manual de instrucciones - Página 30
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony MHC-GPX8. Sony MHC-GPX8 36 páginas. Mini hi-fi component system
Imprimir página
Playback does not start.
• Turn off the system and reconnect the
USB device, then turn on the system.
• Check the information on the websites
about compatible USB devices
(page 16).
Playback does not start from the first
file.
• Set the play mode to Normal Play
(page 20).
Audio file cannot be played back.
• MP3 files in MP3 PRO format cannot be
played back.
• Some AAC files may not be played back
correctly.
• An AAC file which has video stream
cannot be played back.
• WMA files in Windows Media Audio
Lossless and Professional format cannot
be played back.
• USB device formatted with file systems
other than FAT16 or FAT32 are
unsupported.*
• In case multiple partitions exist in USB
device that is being used, files may not
be played back.
• The system can play back to a depth of
8 folders only.
• Files that are encrypted or protected by
passwords and etc. cannot be played
back.
• Files with DRM (Digital Rights
Management) copyright protection
cannot be played back by this system.
* This system supports FAT16 and FAT32, but
some USB device may not support all of these
FAT. For details, refer to the operating
instructions of each USB device or contact the
manufacturer.
30
GB
Tuner
Severe hum or noise, or stations
cannot be received. ("TUNED" or
"STEREO" flashes in the display
panel.)
• Connect the antenna properly.
• Change antenna location and its
orientation to obtain good reception.
• Connect a commercially available
external antenna.
• Consult your nearest Sony dealer if the
supplied AM antenna has come off from
the plastic stand.
• Turn off surrounding electrical
equipment.
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to perform this
operation.
1
Unplug and plug the power cord
back in.
2
Press "/1 to turn on the system.
3
Hold down x and "/1 at the same
time for about 3 seconds.
"RESET" appears in the display panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.