Sony MHC-GR5 Manual de instrucciones - Página 15

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony MHC-GR5. Sony MHC-GR5 28 páginas. Mini hifi component system sony mhc-gr5

Imprimir página
Sony MHC-GR5 Manual de instrucciones
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 8.
Recording a CD:
Specifying Track
Order (program edit)
You can adjust the total recording time to
the tape length while making a program.
Use the buttons on both the unit and the
remote to do this operation.
POWER n ON
10
3
CONTINUE DOLBY NR
7,12
CHECK
1
1
Press FUNCTION repeatedly until "CD"
appears in the display.
2
Press § OPEN/CLOSE and place a CD.
Then, press § OPEN/CLOSE again to
close the disc tray.
3
Press PROGRAM.
"PROGRAM" appears in the display.
4
Turn the jog dial (or press
on the remote) to choose a track.
5
Press ENTER/NEXT.
The chosen track number lights up in
the music calendar and is memorized. If
the track number disappears before you
press ENTER/NEXT, go back to step 4.
6
Repeat steps 4 and 5 to program the
remaining tracks you want to record on
side A in the order you want them to be
recorded.
7
Press
on the remote to pause
recording at the end of side A.
"P" appears in the display. The total
playing time "0.00" is displayed.
8
Repeat steps 4 and 5 to program the
remaining tracks you want to record on
side B in the order you want them to be
recorded.
9
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
p
Make sure the tabs on the cassette have
not been removed.
10
2
Select dual or single-sided recording.
5
To record
1
4
One side of the
p
tape
12
Both sides*
11
* Recording always stops at the end of the
9
reverse side. Be sure to start from the
front side.
11
Press CD SYNCHRO.
Deck B stands by for recording.
12
Press P PAUSE to release recording
pause.
Recording starts.
4
After about 10 seconds, the CD starts
playing.
To stop recording
Press p on deck B or the CD player.
To check the order
Press CHECK on the remote repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel program edit
Press CONTINUE so that "PROGRAM"
disappears from the display.
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR so that "DOLBY NR B" appears
in the display after step 10.
or
Recording From the
Radio
You can record from the tuner onto a tape.
Use TYPE I (normal) or TYPE II (CrO
tape.
4
1
Press DIRECTION to
select
A
ß or RELAY
2
3
4
To record
One side of the
tape
Both sides*
* Recording always stops at the end of the
5
6
To stop recording
Press p on deck B.
continue to next page
POWER n ON
DOLBY NR
Press § EJECT and insert a blank tape
into deck B with the side you want to
record on facing forward.
Recording will start from the front side
of the tape, unless you have changed the
playing direction before recording.
Make sure the tabs on the cassette have
not been removed.
Press TUNER/BAND several times until
the desired radio band appears.
Tune in the radio station you want to
record. (See "Listening to the Radio", or
"Playing Preset Radio Stations" for
details.)
Select dual or single-sided recording.
Press DIRECTION to
select
A
ß or RELAY
reverse side. Be sure to start from the
front side.
Press r REC.
Deck B stands by for recording.
Press P PAUSE to release recording
pause.
Recording starts.
Chapter 4: the Tape Player
)
2
2
p
6
5
1
EN
15