Sony MHC-MG310AV - Mini Hi-fi Component System Manual de instrucciones - Página 32

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony MHC-MG310AV - Mini Hi-fi Component System. Sony MHC-MG310AV - Mini Hi-fi Component System 40 páginas. Sony operating instructions mini hi-fi component system mhc-mg510av,mhc-mg310av,mhc-mg110
También para Sony MHC-MG310AV - Mini Hi-fi Component System: Manual de instrucciones (41 páginas)

Imprimir página

Precautions (continued)

Before placing a cassette in the tape

deck

Take up any slack in the tape. Otherwise the tape may

get entangled in the parts of the tape deck and become

damaged.

When using a tape longer than 90

minutes

The tape is very elastic. Do not change the tape

operations such as play, stop, and fast-winding

frequently. The tape may get entangled in the tape

deck.

Cleaning the tape heads

Clean the tape heads after every 10 hours of use.

Be sure to clean the tape heads before you start an

important recording or after playing an old tape. Use

a separately sold dry-type or wet-type cleaning

cassette. For details, refer to the instructions of the

cleaning cassette.

Demagnetizing the tape heads

Demagnetize the tape heads and the metal parts that

have contact with the tape every 20 to 30 hours of use

with a separately sold demagnetizing cassette. For

details, refer to the instructions of the demagnetizing

cassette.

Troubleshooting

If you have any problem using this system, use

the following check list.

First, check that the power cord is connected

firmly and the speakers are connected correctly

and firmly.

Should any problem persist, consult your

nearest Sony dealer.

General

The display starts flashing as soon as you plug

in the power cord even though you have not

turned on the system (See step 6 of "Hooking up

the system" on page 9).

• Press DISPLAY twice when the system is turned

off. The demonstration disappears.

The clock setting/radio presetting/timer is

canceled.

• The power cord is disconnected or a power

failure occurs longer than half a day.

Redo the following:

— "Setting the time" on page 11

— "Presetting radio stations" on page 18

If you have set the timer, also redo "Waking up

to music" on page 26 and "Timer-recording radio

programs" on page 23.

There is no sound.

• Turn VOLUME clockwise (or press VOL + on

the remote).

• The headphones are connected.

• Insert only the stripped portion of the speaker

cord into the SPEAKER jack. Inserting the vinyl

portion of the speaker cord will obstruct the

speaker connections.

• There is no audio output during timer recording.

There is severe hum or noise.

• A TV or VCR is placed too close to the stereo

system. Move the stereo system away from the

TV or VCR.

• Connect the system to a different wall outlet.

• Install a noise filter (commercially available) to

the power line.