Cisco ASA 5516-X Montar y conectar - Página 3

Navegue en línea o descargue pdf Montar y conectar para Hardware de red Cisco ASA 5516-X. Cisco ASA 5516-X 6 páginas. Threat defense reimage guide
También para Cisco ASA 5516-X: Manual de instalación del hardware (32 páginas), Manual de inicio rápido (8 páginas), Manual de instalación sencilla (11 páginas), Manual de inicio rápido (9 páginas), Manual de software (37 páginas), Manual (14 páginas)

Cisco ASA 5516-X Montar y conectar
Mount and Connect
Figure 2: ASA 5508-X and ASA 5516-X Cabling
1
Gigabit Ethernet data interface (RJ-45)
3
Management 1/1 interface (RJ-45)
b) (Optional) Console port – For use with the CLI. Connect a computer or terminal server using a serial console cable
to either the RJ-45 or Mini USB Type B port.
Only one console port can be active at a time. When a cable is plugged into the USB console port, the RJ-45 port
becomes inactive. Conversely, when the USB cable is removed from the Mini USB Type B port, the RJ-45 port
becomes active. See
console port.
c) Gigabit Ethernet ports – For the network interfaces; use standard RJ-45 Ethernet cables.
You can use any available Gigabit Ethernet port on the ASA 5508-X or ASA 5516-X as a failover link. The failover
link interface is not configured as a normal networking interface; it should only be used for the failover link. You
can connect the failover link by using a dedicated switch with no hosts or routers on the link.
Step 2
Connect the power cord to the ASA, and plug the other end to your power source.
Step 3
Press the power switch to turn the appliance on.
When the Power LED is solid green, the ASA is completely powered on.
Step 4
Check the Status LED on the ASA chassis.
When it is solid green, the ASA has passed power-on diagnostics.
Step 5
See the
Cisco ASA 5508-X and ASA 5516-X Quick Start Guide
Connect to a Console Terminal or PC, on page 4
Connect Cables, Turn on Power, and Verify Connectivity
2
Console port (RJ-45 or Mini USB Type B)
for specific instructions for connecting the
to continue setting up your ASA.
Mount and Connect
3