Sony RCD-W2000ES - Cd/cdr Recorder Manual de instrucciones - Página 33
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony RCD-W2000ES - Cd/cdr Recorder. Sony RCD-W2000ES - Cd/cdr Recorder 44 páginas. Limited warranty (es products)
También para Sony RCD-W2000ES - Cd/cdr Recorder: Garantía limitada (1 páginas)
Imprimir página
Labeling Tracks/Discs Z
You can create titles for tracks/discs for a
recorded CD-R or CD-RW with capital and
small letters, numbers, and symbols. You can
enter a disc name of up to 70 characters, and a
track name of up to 70 characters per track, for
40 tracks per disc.
Label the track/disc before finalizing it. You
cannot label the track/disc on a finalized disc.
After labeling, you must finalize the disc before
you remove the disc or turn off the unit.
Otherwise, the titles will be cleared.
When using the remote, set DECK A/DECK B
to DECK B.
DECK A/DECK B
MENU/NO
./>
m/M
1
Place a CD-R or CD-RW disc that has
not been finalized in DECK B.
2
Press NAME EDIT/SELECT while the
unit is stopped.
"Name In?" appears in the display.
3
Press YES.
4
Press ./> to select the disc or
track you want to label.
When you label the disc name, select
"Disc," and when you label the track name,
select the track number.
5
Press YES.
A flashing cursor appears.
DISC
DECK A
ALBUM
TRACK
REC
TOC
DISC
DECK B
TRACK
CD TEXT
CD - RW
6
7
NAME EDIT/
SELECT
YES
Letter/number/
symbol buttons
CLEAR
x
8
9
To cancel labeling
Press MENU/NO or x.
Press NAME EDIT/SELECT repeatedly
to select the character type as follows:
DISC
DECK A
ALBUM
TRACK
TOC
DISC
DECK B
TRACK
CD TEXT
CD - RW
To select
Capital letters and symbols*
Small letters and symbols*
Numbers
* You can use the following symbols in titles:
' – / , . ( ) : ! ? & + < > _ = " ; # $ % @ * `
To enter a space, press 10/0.
Press a letter/number/symbol button to
enter a character.
DISC
DECK A
ALBUM
TRACK
TOC
DISC
DECK B
TRACK
CD TEXT
CD - RW
To enter a number, press the number button
you want.
To enter a letter or symbol,
1 Press the corresponding letter button
repeatedly until the letter or symbol you
want flashes. You can also enter a letter
or symbol by pressing ./>
repeatedly. To select the symbol, press
> repeatedly after flashing " ' ".
2 Press M.
Repeat steps 6 and 7 until you have
entered the entire title.
If you enter an incorrect character, press
m or M until the incorrect character
starts flashing.
Press CLEAR to erase the incorrect
character, then enter the correct one.
Press YES.
"Complete !" appears in the display for a
few seconds and the track or disc is labeled.
Finalize the disc before you remove the disc
or turn off the unit. Otherwise, the titles will
be cleared.
Display
Selected AB
Selected ab
Selected 12
continued
33