Sony SRS-X77 Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony SRS-X77. Sony SRS-X77 38 páginas. Personal audio system
También para Sony SRS-X77: Manual de instrucciones (28 páginas), Manual de inicio (2 páginas), Manual de instrucciones (48 páginas)
Imprimir página
AUDIO IN button/indicator
Tap to listen to music in a device
connected to the AUDIO IN jack. The
AUDIO IN indicator lights up when
tapped.
Wi-Fi antenna
Set upright during Wi-Fi connection as
below.
Push the right side of the antenna,
and the antenna comes out from the
recess.
Bring up the antenna.
N-Mark
If your smartphone is NFC-compatible,
touch the smartphone on the N-Mark.
The unit will turn on automatically and
registering (pairing) and BLUETOOTH
connection can be made.
NETWORK OFF/ON switch
Turn the network function on and off. Set
this switch to ON when connecting to the
network.
RESET button
Push to reset the unit.
WPS button
Press and hold when connecting to a Wi-
Fi network.
Beeps will be heard by pressing and
holding the WPS button for 2 seconds,
which indicates that the unit is ready to
connect to a wireless router.
If your wireless router has a WPS button,
you can use this button to connect to the
network.
DC OUT ONLY port (USB)
Connect a USB device, such as
smartphone, using a USB cable (not
supplied) to charge from the unit. If you
play music on the connected USB device,
sound will not be output from the unit.
10
US
LAN port
Use a LAN cable (not supplied) to
connect the PC or the wireless router.
When using a LAN cable, use a shielded
type.
AUDIO IN jack
Connect to the headphone jack of a
portable audio device, etc., using a audio
cable (not supplied).
DC IN 18 V jack
Connect the AC adaptor (supplied).
When the indicator is lit or flashing
/ (on/standby) indicator
Indicator status
Unit status
(color)
Lights up (green)
The unit is turned on.
Lights up (orange) The unit is in the
BLUETOOTH/Network
standby mode.
The BLUETOOTH/Network
standby function can be set
only when the unit is
connected to an AC outlet
via the AC adaptor. When
the unit is being powered by
the built-in battery only, the
BLUETOOTH/Network
standby function is not
available.
Turns off
The unit is in the standby
mode.
• If you tap the / (on/
Flashes (green)
standby) button to turn off
the unit, the indicator
flashes slowly in green,
then lights up in orange or
turns off. While the
indicator is flashing, the
unit is not operational.
• When you tap the VOL
(volume) –/+ button, the
indicator flashes once or
three times according to
the volume adjustment.
Flashes (red)
The unit is in the protect
mode. See "/ (on/
standby) indicator is flashing
red" (page 21) for details.