Sony STR-DH130 Manual de instrucciones - Página 31

Navegue en línea o descargue pdf Manual de instrucciones para Sistema estéreo Sony STR-DH130. Sony STR-DH130 35 páginas. Fm stereo / fm-am receiver
También para Sony STR-DH130: Manual de instrucciones (36 páginas), Manual de configuración rápida (2 páginas), Especificaciones (2 páginas), Garantía limitada (1 páginas), Manual de servicio (36 páginas), Manual de servicio (36 páginas)

Imprimir página

1. 3: Connecting the Audio/Video Equipment

Theleftandrightsounds are

unbalanced or reversed.

• Check that the speakers and equipment are

connected correctly and securely.

• Adjust the speaker balance (page 27).

There is severe hum, interrupted noise

or distortion from the equipment

connected to the PORTABLE IN jack.

• Check that the equipment are connected

securely.

• This is not a malfunction and will depend

on the connected equipment.

Recording cannot be carried out.

• Check that the equipment are connected

correctly.

• Select the source equipment using the

input buttons (page 20).

• Copyright protection to prevent recording

is contained in the sources. In this case,

you may not be able to record from the

sources.

Tuner function

is not selectable.

• Consult your nearest Sony dealer.

The FM reception

is poor.

• Use a 75-ohm coaxial cable (not supplied)

to connect the receiver to an outdoor FM

antenna (aerial) as shown below.

Outdoor FM antenna

(aerial)

Radio stations

cannot

be tuned in.

• Check that the antennas (aerials) are

connected securely. Adjust the antennas

(aerials) and connect an external antenna

(aerial), if necessary.

• The signal strength of the stations is too

weak with automatic tuning. Use direct

tuning.

• Make sure you set the tuning scale

correctly (when tuning in AM stations

with direct tuning) (page 23).

• No stations have been preset or the preset

stations have been cleared (when tuning by

scanning preset stations is used). Preset the

stations (page 24).

• Press DISPLAY repeatedly so that the

frequency appears on the display panel.

RDS does not work.*

• Make sure that you are tuned to an FM

RDS station,

• Select a stronger FM station,

• The station you tuned to is not transmitting

the RDS signal or the signal strength is

weak,

The RDS information

that you want

does

not appear.*

• The service

may be temporarily

out of

order, Contact

the radio station and find

out whether

they actually

provide

the

service in question,

* Europe model only.

O..

-I

,,,1

_=_,.

31_B