Cisco ASR 9000 Series Configuración de los ajustes de red - Página 16
Navegue en línea o descargue pdf Configuración de los ajustes de red para Hardware de red Cisco ASR 9000 Series. Cisco ASR 9000 Series 26 páginas. Line card
También para Cisco ASR 9000 Series: Manual de configuración (46 páginas), Manual de configuración (50 páginas), Manual (24 páginas), Configuración de (46 páginas), Manual (44 páginas), Manual de consulta rápida (7 páginas)
Imprimir página
Upgrading and Managing Satellite nV Software
Upgrading and Managing Satellite nV Software
Satellite software images are bundled inside a PIE called asr9k-9000v-nV-p.pie within the Cisco
ASR9000 Series package. The Cisco IOS XR software production SMU tool can be used to generate
patches for the satellite image in the field to deliver bug fixes or minor enhancements without requiring
a formal software upgrade.
This section provides the commands to manage the satellite nV Software.
Prerequisites
You must have installed the satellite installation procedure using the Plug-and-Play satellite installation
procedure. For more information, see
installation).
Installing a Satellite
To download and activate the software image on the satellite, use the install nv satellite <satellite ID /
all> transfer/activate commands. The transfer command downloads the image to the satellite. When
the activate command is followed by the transfer command, the software is activated on the satellite.
Example
RP/0/RSP0/CPU0:sat-host#install nv satellite 100 transfer
Install operation initiated successfully.
RP/0/RSP0/CPU0:sat-host#RP/0/RSP0/CPU0:May
%PKT_INFRA-ICPE_GCO-6-TRANSFER_DONE : Image transfer completed on Satellite 100
RP/0/RSP0/CPU0:sat-host#install nv satellite 100 activate
Install operation initiated successfully.
LC/0/2/CPU0:May
GigabitEthernet100/0/0/28, changed state to Down
RP/0/RSP0/CPU0:May
removed
If the activate command is run directly, then the software image is transferred to the satellite and also
Note
activated.
Example
RP/0/RSP0/CPU0:sat-host#install nv satellite 101 activate
Install operation initiated successfully.
RP/0/RSP0/CPU0:sat-host#RP/0/RSP0/CPU0:May
%PKT_INFRA-ICPE_GCO-6-TRANSFER_DONE : Image transfer completed on Satellite 101
RP/0/RSP0/CPU0:May
Image install completed on Satellite 101
RP/0/RSP0/CPU0:May
removed
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Configuration Guide
HC-722
Configuring the Satellite Network Virtualization (nV) System on the Cisco ASR 9000 Series Router
Plug and Play Satellite nV Switch Turn up: (Rack, Plug, and Go
3 20:13:50.363 : ifmgr[201]: %PKT_INFRA-LINK-3-UPDOWN : Interface
3 20:13:50.811 : invmgr[254]: %PLATFORM-INV-6-OIROUT : OIR: Node 100
3 20:06:33.449 : icpe_gco[1146]: %PKT_INFRA-ICPE_GCO-6-INSTALL_DONE :
3 20:06:33.510 : invmgr[254]: %PLATFORM-INV-6-OIROUT : OIR: Node 101
3 20:12:46.732 : icpe_gco[1146]:
3 20:06:33.276 : icpe_gco[1146]:
OL-26061-03