Cisco ASR 9000 Series Manual de configuración - Página 4
Navegue en línea o descargue pdf Manual de configuración para Hardware de red Cisco ASR 9000 Series. Cisco ASR 9000 Series 50 páginas. Line card
También para Cisco ASR 9000 Series: Configuración de los ajustes de red (26 páginas), Manual de configuración (46 páginas), Manual (24 páginas), Configuración de (46 páginas), Manual (44 páginas), Manual de consulta rápida (7 páginas)
Imprimir página
Information About Configuring Serial Interfaces
The Cisco 2-Port and 4-Port Channelized T3 SPAs can run in clear channel mode, or they can be
Note
channelized into 28 T1 or 21 E1 controllers.
The Cisco 4-Port Channelized T3/DS0 SPA can run in clear channel mode, or it can be channelized into
Note
28 T1 or 21 E1 controllers.
•
On channelized T3 to T1/E1 controllers, serial interfaces are automatically created when users configure
Note
individual DS0 channel groups on the T1/E1 controllers.
Information About Configuring Serial Interfaces
To configure serial interfaces, study the following concepts:
•
•
•
Cisco ASR 9000 Aggregation Services Router Interfaces and Hardware Component Configuration Guide
502
Cisco 2-Port and 4-Port Channelized T3 SPAs
–
Cisco 4-Port Channelized OC-12/DS3 line cards
–
Cisco 1-Port Channelized OC-48/STM-16 SPA and line cards
–
The following hardware supports T1/E1 controllers and DS0 channels:
Cisco 2-Port and 4-Port Channelized T3 SPAs
–
Cisco 4-Port Channelized OC-12/DS3 line cards
–
Cisco 1-Port Channelized OC-12/DS0 SPAs and line cards
–
Cisco 1-Port Channelized OC-48/DS3 SPAs and line cards
–
Cisco 1-Port Channelized OC3/STM-1 SPA
–
Cisco 8-Port Channelized T1/E1 SPA
–
The following hardware supports serial interfaces:
–
Cisco 2-Port and 4-Port Clear Channel T3/E3 SPAs
–
Cisco 2-Port and 4-Port Channelized T3 SPAs
–
Cisco 4-Port Channelized OC-12/DS3 line cards
Cisco 1-Port Channelized OC-12/DS0 SPAs and line cards
–
Cisco 1-Port Channelized OC-48/DS3 SPAs and line cards
–
Cisco 1-Port Channelized OC3/STM-1 SPA
–
Cisco 8-Port Channelized T1/E1 SPA
–
You should have configured the clear channel T3/E3 controller or channelized T3 to T1/E1
controller that is associated with the serial interface you want to configure, as described in the
"Configuring Clear Channel T3/E3 and Channelized T3 and T1/E1 Controllers on the
Cisco ASR 9000 Series Router"
High-Level Overview: Serial Interface Configuration on Clear-Channel SPAs, page 503
High-Level Overview: Serial Interface Configuration on Channelized SPAs, page 504
Cisco HDLC Encapsulation, page 506
Configuring Serial Interfaces on the Cisco ASR 9000 Series Router
module in this manual.
OL-26061-03