Cisco ATA 191 Comenzar - Página 2

Navegue en línea o descargue pdf Comenzar para Hardware de red Cisco ATA 191. Cisco ATA 191 8 páginas. Analog telephone adapter
También para Cisco ATA 191: Manual del usuario (30 páginas), Manual de administración (4 páginas), Manual del usuario (10 páginas), Manual (10 páginas), Manual de inicio rápido (13 páginas), Manual de instalación (6 páginas), Manual del usuario (40 páginas), Manual del usuario (30 páginas)

Cisco ATA 191 Comenzar

ATA 191 Top Panel

Note
The ATA network port performs autonegotiation for duplex and speed. It supports speeds of 10/100 Mbps
and full-duplex.
ATA 191 Top Panel
The top panel of your ATA has several LEDs that are used to show the device's status.
Figure 1: ATA 191 Top Panel
The following table describes the LEDs located on your ATA.
Table 1: ATA 191 Top Panel Items
Item
Power LED
Network LED
Phone 1 LED
Phone 2 LED
Get Started with Your New ATA
2
Description
Steady green: System booted up successfully and is ready for use.
Slow flashing green: System is booting up.
Fast flashing green three times, then repeats: System failed to boot
up.
Off: Power is off.
Flashing green: Data transmission or reception is in progress through
the WAN port.
Off: No link.
Steady green: On hook.
Slow flashing green: Off hook.
Fast flashing green three times, then repeats: The analog device failed
to register.
Off: The port is not configured.
Get Started with Your New ATA