Cisco C85FE-16FACL-16K Manual de instalación - Página 14
Navegue en línea o descargue pdf Manual de instalación para Hardware de red Cisco C85FE-16FACL-16K. Cisco C85FE-16FACL-16K 19 páginas. Installing and grounding the chassis
Imprimir páginaSpecifications and Regulatory Compliance Information
Description
Specifications
Switch and processor
10-Gbps shared memory, nonblocking switch fabric up to 32-KB
capacity
frames
Dimensions (H x W x D)
Chassis: 10.4 x 17.25 x 18.4 in (26.4 x 43.8 x 46.7 cm)
Processor, switch processor, carrier module, and interface module:
1.2 x 14.4 x 16 in (3.0 x 36.6 x 40.6 cm)
Port adapter: 1.2 x 6.5 x 10 in (3.0 x 16.5 x 25.4 cm)
Power supply: 2.7 x 6.0 x 15.3 in (6.9 x 15.2 x 38.9 cm)
Weight
Empty chassis: 32 lb (14.51 kg)
Fully populated chassis: approximately 130 lb (58.97 kg)
AC power supply: 11 lb (4.99 kg)
DC power supply: 10 lb (4.54 kg)
Airflow
95 cfm through the system fan assembly
Operating temperature
32 to 122 F (0 to 50 C)
–
Nonoperating temperature
40 to 167 F (
Humidity
10 to 90%, noncondensing
–
Altitude
500 to 6,500 ft (
Microprocessor
100-Mhz MIPS R4700
AC total output
388W maximum
AC-input voltage
100-127/200-240 VAC wide input with power factor correction
AC frequency
Auto sensing limits: 100 to 127/200 to 240 VAC, 8/4A, 50/60 Hz
AC current rating
8/4A with the chassis fully populated
Power supply load
376W maximum configuration, 200W typical with max configuration
DC voltages supplied and
System:
steady-state maximum
current ratings
Processor:
–
40 to 75 C)
–
152 to 2000 m)
+5V @ 70A
+12V @ 2A
+24V @ 0.12A
+5V @ 15A
+24V @ 25mA
+12V @ 500mA
Description
Specifications
Memory
8-MB Flash memory SIMM (upgradable to 16 MB)
64-MB DRAM
256-KB boot EPROM
128-KB SRAM
No Flash PC card installed by default (accepts 8-, 16-, or 20-MB Intel
Series 2+ Flash PC cards)
Regulatory Compliance
CE Marking (European Union)
UL 1950 (U.S.A.)
CSA C22.2 No. 950 (Canada)
EN60950 (European Union)
IEC60950 (International)
AS/NZS 3260 (Australia/New Zealand)
TS001 (Australia)
21CFR1040 (Laser - U.S.A.)
EN60825 (Laser - European Union)
IEC60825 (Laser - International)
FCC Part 15 (CFR 47) Class A (U.S.A.)
VCCI Class A with UTP and Class B with FTP cables (Japan)
EN55022 Class A with UTP and Class B with FTP cables (European
Union)
CISPR 22 Class A with UTP and Class B with FTP cables
(International)
AS/NZS 3548 Class A with UTP and Class B with FTP cables
(Australia/New Zealand)
EH 55024
EH 50082-1
ET5300 386-2
ICES 003 Class A
1.
Products bear CE Marking indicating compliance with the 99/5/EC directive, which includes the following safety
and EMC standards.
1