Cisco Catalyst 7500 Series Sustitución manual - Página 8
Navegue en línea o descargue pdf Sustitución manual para Hardware de red Cisco Catalyst 7500 Series. Cisco Catalyst 7500 Series 40 páginas. Chassis interface board
También para Cisco Catalyst 7500 Series: Ficha de datos (11 páginas), Manual de solución de problemas (11 páginas), Manual de configuración (50 páginas)
Imprimir página
Replacing the CI in the Cisco 7505
Step 8
Figure 3
Note
Figure 4. The runner on the bottom of the fan tray has to slide along in the track on the floor. At the
same time, the runner on the top of the tray has to slide through the notch at the top of the chassis
opening, then over the top of the card cage while staying to the left of the L-bracket on the chassis
ceiling.
8 Replacing the Chassis Interface (CI) Board in the Cisco 7500 Series Chassis
Hold the assembly in the position shown in Figure 3. You can hold the handle with either
your right or left hand as long as you use both hands to handle the tray. However, when
inserting the tray, there is little room between the tray and the right side of the chassis. Keep
the tray as straight as possible, or you may have trouble inserting it into the chassis.
Replacing the Fan Tray
Removing/replacing
fan tray
Before inserting the fan tray, compare the hardware inside the chassis to that shown in