Argo-Hytos RPE3-062 S3 Series Manual de instrucciones - Página 15
Navegue en línea o descargue pdf Manual de instrucciones para Unidad de control Argo-Hytos RPE3-062 S3 Series. Argo-Hytos RPE3-062 S3 Series 16 páginas. 4/2 hydraulic directional control valve with axial spool position sensor, solenoid operated, suitable for use as a safety component with certified functional safety
Imprimir página
b) Checking the sensor settings and electrical wiring
The relative position of the sensor parts (flange, body, and lock nut) is marked with a colour after setting by the manufacturer.
Check that the setting has not been disturbed.
Check that the sensor connector socket is secure and that the power and signal transmission cable to the control unit is not damaged.
DANGER
6.8 Dodávané náhradní díly
Jako náhradní díl lze objednat:
6.8 Spare parts supplied
Ordered as spare parts:
Item
Description of spare part
1
Sealing rings on the base
2
Solenoid coil
The storage conditions for seals are specified in ISO 2230 - Rubber products - Storage guidelines:
Seals to be stored:
› in covered, dry and tempered areas at temperatures of +15 to +25 °C, away from direct heat sources
› protected from the weather, direct sunlight and ultraviolet radiation
› undeformed, on a clean flat base in the original packaging
› out of reach of petroleum and chemical substances
Rubber group
Chemical name abbreviation according to ISO 1629
A
Polyuretane AU
B
NBR
C
FKM / FPM (Viton
6.9 Activities after the expiry date of the product
Remove the valve from the hydraulic circuit (see chapter 6.6 Repairs carried out by specialist).
Remove as much residual working fluid from the valve as possible.
Dispose of the valve in an environmentally friendly manner in accordance with the applicable regulations.
The valve is mainly made of recyclable materials (carbon steel, cap - PE). (see chapter 3.1 Materials used).
7. Manufacturer contact
ARGO-HYTOS s.r.o.
Dělnická 1306
CZ - 543 01 VRCHLABÍ
Czech Republic
Tel. +420 499 403 111
E-mail:
Page 15
In the event of a fault in the sensor or a change in the sensor settings,
turn off the device immediately. There is a risk of accident and/or serious injury.
Do not repair or adjust the position sensor!
Designation
4x square ring 9,25x1,68 (NBR)
4x O-ring 9,25x1,78 (FPM)
C22 ... (by coil type )
)
®
Order number
15845200
15845400
seeHC 8007 catalog
Chemical composition
Polyester urethane rubber
Butadiene acrylonitrile rubber
Fluoroelastomer
Operating_Instructions_RPE3-062x/xS3_14087_1en_05/2022
Length of storage
5 years
7 years
10 years
www.argo-hytos.com