Cisco Cisco mds 9216 - fabric switch Manual de instalación del hardware - Página 32

Navegue en línea o descargue pdf Manual de instalación del hardware para Hardware de red Cisco Cisco mds 9216 - fabric switch. Cisco Cisco mds 9216 - fabric switch 36 páginas. Multilayer fabric switch
También para Cisco Cisco mds 9216 - fabric switch: Manual de conexión (13 páginas), Manual de configuración (49 páginas), Nota de publicación (48 páginas), Nota de publicación (44 páginas), Nota de publicación (44 páginas), Nota de publicación (36 páginas), Nota de publicación (26 páginas), Nota de publicación (22 páginas), Manual de consulta rápida (14 páginas), Nota de publicación (3 páginas), Especificación (11 páginas)

Imprimir página
Cisco Cisco mds 9216 - fabric switch Manual de instalación del hardware
Removing and Installing Components
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Figure 2-20 845-W AC Power Supply Front Panel
1
5
1 Power switch
2 Power cable retainer
3 Power supply LEDs
Hold the power supply by the handle and orient it as shown in
Step 4
power supply bay, ensuring that it is fully seated in the bay.
Figure 2-21 Handling an 845-W AC Power Supply
Tighten the power supply captive screws.
Step 5
Plug the power cable into the power supply, and tighten the screw on the power cable retainer to ensure
Step 6
the cable cannot be pulled out.
Note
Connect the other end of the power cable to an AC power source.
Step 7
Caution
Cisco MDS 9216 Switch Hardware Installation Guide
2-32
2
PWR-845-AC
100-240V 12-5A
50/60 Hz
ALL FASTENERS MUST BE FULLY ENGAGED
PRIOR TO OPERATING OF POWER SUPPLY
4
Depending on the outlet receptacle on your power distribution unit, you may need the optional
jumper power cord to connect the Cisco MDS 9216 Switch to your outlet receptacle. See the
"Jumper Power Cord" section on page C-8
In a system with dual power supplies, connect each power supply to a separate power source.
In case of a power source failure, the second source will most likely still be available.
3
INPUT OK
FAN OK
OUTPUT FAIL
4 AC power connection
5 Captive screw
Chapter 2
Installing the Cisco MDS 9216 Switch
Figure
2-21, and then slide it into the
OL-6985-01