DigiTrace RAYSTAT-EX-02 Manual de instrucciones de instalación - Página 13
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Termostato DigiTrace RAYSTAT-EX-02. DigiTrace RAYSTAT-EX-02 18 páginas.
También para DigiTrace RAYSTAT-EX-02: Manual de instrucciones de instalación (14 páginas)
Imprimir páginaThermostat
Area of use
Approval certification
Enclosure
Body and lid
Protection
Lid fixing
Entry
Ambient operating
temperature
Temperature sensing
Type
Dimensions
Material
Exposure temperature
Minimum bend radius
Switching
Type
Rating
Setting
Range
Repeatability
Differential
Accuracy (switch on)
Method
Connection terminals
Supply
Internal earth
External earth
Mounting method
Raychem support bracket SB-100, SB-101, SB-110, SB-111 or surface mounting
with 4 fixing holes (M6) on 101.5 x 101.5 mm centres
Accessories
Power cable gland for
armoured cable
Power cable gland for
non-armoured cable
(to be ordered separately)
Ordering details
Part description
PN (Weight)
ENGLISH
Hazardous area: Zone 1, Zone 2 (Gas),
Zone 21, Zone 22 (Dust)
Ordinary
LCIE 08 ATEX 6095 X
II 2 G D Ex d IIC T6 Ex tD A21 IP6X T80˚C
IECEX LCI 08.0036 X
Ex d IIC T6 Ex tD A21 IP6X T80˚C
Lacquer coated cast aluminium with stainless
steel fittings and nitrile rubber internal lid seal
IP 65 if installed with Raychem cable glands GL-33 or GL-34
Screw thread lid locked in place by a 2 mm hexagonal
key grub screw
1 x 3/4" NPT
–40°C to +60°C
Fluid filled bulb and capillary
Capillary 3 m long, bulb 197 mm x 8 mm
Stainless steel (Type 55316)
–50°C to +215°C
DO NOT BEND BULB, 15 mm for capillary
Single pole change over volt free contacts (SPDT)
22 A at 250 VAC, switching (100.000 cycles),
32 A continuous current limit
–4°C to +163°C
±1.7 K
5 K
±4.5°C at 21°C ambient and 50°C sensor temperature
External knob and dial
3 terminals for 1 to 4 mm
Single bolt for 1 to 4 mm
Single bolt and clamp for 1 to 4 mm
GL-33
493217-000
GL-34
931945-000
RAYSTAT-EX-02
404385-000 (1770 g)
2
conductors
2
conductors
2
conductors