Cisco Firepower 4100 Series Manual del producto - Página 11
Navegue en línea o descargue pdf Manual del producto para Hardware de red Cisco Firepower 4100 Series. Cisco Firepower 4100 Series 17 páginas. Rack-mount and ground the chassis
También para Cisco Firepower 4100 Series: Manual (8 páginas), Manual de mantenimiento y actualización (20 páginas), Manual (36 páginas), Manual (8 páginas), Manual (42 páginas), Manual (38 páginas)
Imprimir página
Installation and Configuration
OS Version 3.0.80.0
Checking for new bootloader: Upgrading... ok
Initializing OS Services: ok
Initializing Serial Services: ok
Initializing Network Services: ok
Starting ARP Services: ok
Starting System Services: ok
Starting Fast Path Hardware Acceleration: ok
Starting Switching Services: ok
Starting QOS Services: ok
Starting Network Interfaces: ok
Starting Access Control List Services: ok
Starting System Interfaces: ok
Starting LWAPP: ok
Starting Crypto Accelerator: ok
Starting Certificate Database: ok
Starting VPN Services: ok
Starting Security Services: ok
Starting Policy Manager: ok
Starting Virtual AP Services: ok
Starting Director: ok
Starting Mobility Management: ok
Starting Authentication Engine: ok
Starting Broadcast Services: ok
Starting Power Over Ethernet Services: ok
Starting Logging Services: ok
Starting Management Services:
Web Server: ok
CLI: ok
Secure Web: Web Authentication Certificate not found (error).
(Cisco WLAN Solution Controller)
If this is the first time the controller has been powered up, or if you enter 'Recover-Config' in the User:
Step 3
prompt, the bootup script runs the Startup Wizard, which prompts you for basic configuration input.
If this is the atleast the second time you have powered up the controller, the bootup script prompts you
for a login and password. Enter the login and password as described in
Recover-Config to reset the controller configuration to factory defaults.
In either of the two cases explained above, the controller has passed the POST test.
Using the Startup Wizard
The first time you power up the controller with a new factory-default Operating System configuration,
use the Startup Wizard to do the following:
Use the information you collected in
Note
1.
2.
The Service-Port and Management Interfaces must be on different subnets
Note
78-17155-01
Enter the system (controller) name, up to 32 printable ASCII characters.
Enter the Administrative user name and password, each up to 24 printable ASCII characters. The
default Administrative user name and password are admin and admin, respectively.
Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide
"Collecting Required Tools and
Using the Startup Wizard
"Logging
In," or enter
Information" for this step.
11