Cisco Firepower 9300 Instalación y mantenimiento - Página 28

Navegue en línea o descargue pdf Instalación y mantenimiento para Hardware de red Cisco Firepower 9300. Cisco Firepower 9300 36 páginas. Installation, maintenance, and upgrade guide
También para Cisco Firepower 9300: Primeros pasos (42 páginas)

Imprimir página

Connect the HVDC Power Supply Module

Warning

Step 1

Install the HVDC power supply module in the chassis and make note of the bay number so you can connect the HVDC

power cord to the correct power feed on the HVDC power supply module at the rear of the chassis. See

Replace the Power Supply Module, on page 17

Step 2

Verify that the power is off to the DC circuit on the power supply module that you are installing.

Step 3

Make sure that all site power and grounding requirements have been met.

Step 4

Plug the HVDC power cord into the power feeds for PSU-1 and/or PSU-2.

Installation, Maintenance, and Upgrade

Statement 1089 Instructed and Skilled Person Definitions

An instructed person is someone who has been instructed and trained by a skilled person and takes

the necessary precautions when working with equipment.

A skilled person or qualified personnel is someone who has training or experience in the equipment

technology and understands potential hazards when working with equipment.

Statement 1090 Installation by Skilled Person

Only a skilled person should be allowed to install, replace, or service this equipment. See statement

1089 for the definition of a skilled person.

Statement 1091 Installation by an Instructed Person

Only an instructed person or skilled person should be allowed to install, replace, or service this

equipment. See statement 1089 for the definition of an instructed or skilled person.

for the procedure.

Installation, Maintenance, and Upgrade

Remove and