Digitrax DN163K1a Manual de inicio rápido - Página 6

Navegue en línea o descargue pdf Manual de inicio rápido para Media Converter Digitrax DN163K1a. Digitrax DN163K1a 8 páginas. N scale mobile decoder. dcc plug 'n play 1.5 amp/2.0 amp peak 6 fx3 functions, 0.5 amp

Imprimir página

D D

Run Your Trains, Not Your Track!

Function Outputs on the DN163K1a

The DN163K1a is set up at the factory to control six functions. The unit is

prewired with two golden-white LEDs set up for directional lighting as

F0F/F0F+ for the front light and F0R/F0R+ for the rear light. Functions F1

(Green), F2 (Violet), F3 (Brown) and F4 (White/Yellow) can be used by solder-

ing a wire from the pad for the function you wish to use to the lamp (or other

function) you wish to control. The wire colors indicated are the standard color

code used in the industry (you can use any color you like). These colors are

important if you plan to use function remapping.

CAUTION: When adding function wires, be very careful that the wires you

add do not come into contact with any other pads or components on the

board where they might create a short circuit, damage the board and void the

warranty.

All six function outputs can be easily set up with Digitrax FX

or as standard on/off functions with the following operational qualifiers:

1. Forward or Reverse direction of travel, or

2. Whether F0 is on or off, or

3. Both direction of travel and whether F0 is on or off, or

4. Whether the locomotive is stopped or moving.

Figure 5: Connecting More Functions to Your DN163K1a Decoder

F0R+

F0R (Yellow)

F3 (Brown)

F2 (Violet)

F4 (White/Yellow)

F1 (Green)

C C

igitrax

ommand

ontrol

Top of DN163K1a Decoder

Bottom of DN163K1a Decoder

www.digitrax.com

lighting effects

F0F (White)

+common

(Blue)

Motor Clips

FRONT OF LOCO

F0F+