Digitrax SoundFX SDXN146K2 Manual - Página 4

Navegue en línea o descargue pdf Manual para Media Converter Digitrax SoundFX SDXN146K2. Digitrax SoundFX SDXN146K2 12 páginas.

Changing the Decoder Address

The first CV most people change is the decoder address. This allows

you to independently control each loco with a unique address. Digitrax

decoders are shipped with CV01 (AD2), the two digit address, set to 03.

Following is a brief description of how to change the decoder address

with a Digitrax DT4XX series throttle. See your Starter Set Manual for

complete programming instructions.

Place the loco on the programming track not to exceed 16V.

Go into Program Mode on your system. On DT4XX throttle press

PROG.

2. Choose AD2 for 2 digit addressing or AD4 for 4 digit addressing.

3. Choose the address you want to set up for the decoder.

4. Complete address programming by pressing ENTER.

Note: CV29 must also be programmed to enable 4 digit addressing, this

is done automatically by the DT4XX throttles. See your Digitrax Decoder

Manual or the Digitrax Toolbox App for how to set up CV29.

Using this decoder in other locomotives

The factory supplied sound project loaded into the SDXN146K2 is for a

GP38 diesel locomotive, other preloaded projects are selectable with the

value in CV60. If you want to install it in a different locomotive, you can

simply load a different sound project for that type of locomotive. The cam

input is available for Steam installations where you want to synchronize

chuffing.

Digitrax LocoMotion

Your locomotives look like the real thing, now you can make them run

like the real thing, too. Digitrax decoders incorporate torque compensa-

tion for smooth as silk operation. You can also program CVs that control

momentum, 3 step and 128 step speed tables, switching speed, normal

direction of travel, scalable speed stabilization and more to take full ad-

vantage of the Digitrax LocoMotion System

Momentum-CV03 & CV04

Momentum is part of the LocoMotion System. Acceleration is controlled

by CV03 and deceleration by CV04. Both come from the factory set to

000. A range of 000 to 031 is available for both accel and decel. Try

CV03:003 and CV04:000 as a starting point for changing momentum.

System

— 4 —