Digitronic AWA/2X12B Manual - Página 9

Navegue en línea o descargue pdf Manual para Media Converter Digitronic AWA/2X12B. Digitronic AWA/2X12B 10 páginas. Analog digital converter

Digitronic

Automationsanlagen GmbH

7. Technical data

Voltage supply:......................................................... 24VDC +-20%

Power conssumption:............................................... 150 mA

Input ranges: ............................................................ "0 - +10V" or "0 - 20mA"

Input resistance

at voltage input......................................................... RL = 10 kOhm

at power input:.......................................................... RL = 220 Ohm

Resolution ................................................................ 12 Bit

Reference voltage source: ....................................... +4.096V (standard), +5V or extern.

Data output:.............................................................. synchronous serial RS422

Clock frequency: ...................................................... maximum 1 MHz

Monoflop i.e. transforming time................................ minimum 250 µs

Grounding: ............................................................... via 4 * 6.3mm Flatplugs directly to be laid on row-

Assembling .............................................................. simply clamp upon carrier rail

Disassembly............................................................. by pulling back the snapping bars

Protection ................................................................. Type of case: Phoenix UM corresponds to IP20

Dimensions: ............................................................. See also chapter 6.3. Calibration.

Working temperature ............................................... 0°C to + 50° C

Weight:..................................................................... apprpoximately 400g

Edition: Jun. 17

Analog - Digital - Converter

minimum 100 kHz

grounding pin.

according to EN 50 022, may be set in rows.

The following mounting rails may be used to fasten

the case: NS 35 / 7.5 (DIN 50022) NS 35 / 15 (DIN

50022) NS 32 (DIN 50035)

and

cap made of 1mm galvanized tin.

AWA/2X12B

Page: 9