Cisco PIX 501 Manual de inicio rápido - Página 13

Navegue en línea o descargue pdf Manual de inicio rápido para Hardware de red Cisco PIX 501. Cisco PIX 501 20 páginas. Data sheet
También para Cisco PIX 501: Ficha de datos (8 páginas), Manual de inicio rápido (21 páginas), Manual de inicio rápido (20 páginas), Manual de inicio rápido (18 páginas)

Restore the Default Configuration

Caution

Entering the config factory-default command erases the current running configuration.

If you inadvertently erase the default configuration or need to restore the default configuration, you

can restore the factory default values in one of the following ways:

• Run the Startup Wizard and click Reset PIX to Factory Default Configuration from the Starting

Configuration page.

• Use PDM and click File>Reset PIX to Factory Default Configuration.

• Use PDM or a terminal emulation program and enter the following commands:

Command

configure factory-default [inside

Step 1

ip address [address_mask]]

Step 2

write memory

If the optional inside IP address and optional address mask are specified, the factory-default configuration

will reflect the specified IP address.

The config factory-default command considers both licensing and platform in creating DHCP

Note

pool sizes of 32 or 128.

Refer to the following website for detailed command information and configuration examples:

http://cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmd_ref/index.htm

The Cisco TAC website is available to all customers who need technical assistance. To access the TAC

Website go to:

http://www.cisco.com/tac

Description

Erases the running configuration and replaces it with

the factory default configuration.

Writes the factory default configuration to Flash

memory.