AcueLighting Profile S300 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Equipo para DJ AcueLighting Profile S300. AcueLighting Profile S300 9 páginas. 300w led framing profile spotlight

Imprimir página

Installation

This fixture is designed for indoor use only and must be used in a dry location with adequate ventilation. Ensure that

none of the fixture's ventilation slots are blocked.

Fasten the fixture to a secure structure or surface. Do not stand fixture on a surface or leave it where it can be moved

or fall over. If you install the fixture in a location where it may cause injury or damage if it falls, make sure secure it

as directed in this user manual using a securely anchored safety cable that will hold the fixture if the primary

fastening method fails.

Fastening the fixture to a flat surface

The fixture can be fastened to a hard, fixed, flat surface that is oriented at any angle. Ensure that the surface and all

fasteners used can support at least 10 times the weight of all fixtures and equipment to be installed on it.

Fasten the fixture securely. Do not stand it on a surface or leave it where it can be moved or fall over.

If you install the fixture in a location where it may cause injury or damage if it falls, secure it as directed below with

a securely anchored safety cable that will hold the fixture if the primary fastening method fails.

Mounting the fixture on a truss

The fixture can be clamped to a truss or similar rigging structure in any orientation. When installing the fixture

hanging vertically down, you can use an open-type clamp such as a C-clamp or trigger clamp. When installing in

any other orientation, you must use a half-coupler clamp that completely encircles the truss tube.

To clamp the fixture to a truss:

1. Check that the rigging structure can support at least 10 times the weight of all fixtures and equipment to be

installed on it.

2. Block access under the work area.

3. Fold the legs of the mounting bracket together and bolt a rigging clamp securely to the mounting bracket. The

bolt used must be M10, grade 8.8 steel at the minimum. It must pass through both mounting bracket legs and be

fastened with a self-locking nut.

4. Working from a stable platform, hang the fixture with its clamp on the truss and fasten the clamp securely.

5. Secure the fixture with a safety cable as directed below.

Securing with a safety cable

Secure the fixture with a safety cable (or other secondary

attachment) that is approved for the weight of the fixture

so that the safety cable will hold the fixture if the

primary attachment point fails.

Loop the safety cable through the eyebolt in the back of

the fixture and around a secure anchoring point. Do not

loop the safety cable around the fixture's mounting

bracket only, as this will leave the fixture unsecured if it

separates from the bracket.

**SAFETY INFORMATION**

Version 1.0