Fimer FLEXA Stand-Basic Manual de instalación - Página 5

Navegue en línea o descargue pdf Manual de instalación para Cargador de batería Fimer FLEXA Stand-Basic. Fimer FLEXA Stand-Basic 16 páginas.

General information

FIMER FLEXA Stand-Basic, thanks to its compact design and its flexibility, is a support suitable for

the different versions of FIMER FLEXA AC Wallbox and for all positioning needs, both outdoor and

indoor installations. It is available for single and double charging modes.

Both configurations of FIMER FLEXA Stand-Basic are equipped with "L" support, designed to offer

a practical stand for the charging cable.

WARNING –

international standards in force according to the product's characteristics.

WARNING –

A description of the features of the equipment is provided to identify its major components and

specify the technical terminology used in the manual.

READ THE MANUAL –

features and technical data, overall dimensions and identification of the equipment.

1.1

FIMER shall not be liable for damage of any kind resulting from incorrect or careless operations.

The equipment may not be used for any purpose other than that intended in the field of use. The

equipment must not be installed by inexperienced personnel, or even by expert personnel if opera-

tions are carried out on the equipment that do not comply with this manual and the accompanying

documentation.

FORBIDDEN –

AC Wallbox products.

ATTENTION –

specific local regulations regarding system safety and protection against faults that the

installer must understand and implement.

It is strictly prohibited to:

FORBIDDEN –

conditions or in adverse or unpermitted environmental conditions.

FORBIDDEN –

different to FIMER FLEXA AC Wallbox.

FORBIDDEN –

equipment or generate electrostatic charges.

FORBIDDEN –

read and properly understood the contents of the operation and maintenance manual.

Prepare and size the entire installation site in compliance with the local and

This document describes how to install, configure, and maintain the product.

This chapter contains information on models, details on equipment,

The product has been designed as a support for all versions of FIMER FLEXA

In case of installation in TN-type earthing systems, there may be additional

Install the equipment in environments subject to particular flammability

Use the equipment or parts of the equipment for the installations of products

Clean the product with corrosive products that could damage parts of the

Use or install the equipment or any associated parts thereof without having