Cisco SNS 3755 Manual de instalación del hardware - Página 26

Navegue en línea o descargue pdf Manual de instalación del hardware para Hardware de red Cisco SNS 3755. Cisco SNS 3755 42 páginas.

Installing the Cable Management Arm (Optional)

Note

Step 1

With the appliance pushed fully into the rack, slide the CMA tab of the CMA arm that is farthest from the appliance onto

the end of the stationary slide rail that is attached to the rack post. Slide the tab over the end of the rail until it clicks and

locks.

Figure 10: Attaching the CMA to the Rear Ends of the Slide Rails

Step 2

Slide the CMA tab that is closest to the appliance over the end of the inner rail that is attached to the appliance. Slide the

tab over the end of the rail until it clicks and locks

Step 3

Pull out the width-adjustment slider that is at the opposite end of the CMA assembly until it matches the width of your

rack.

Cisco Secure Network Server 3700 Series Appliance Hardware Installation Guide

The cable management arm (CMA) is reversible left-to-right. To reverse the CMA, see

Management Arm (Optional), on page 23

CMA tab on arm farthest from appliance

attaches to end of stationary outer slide

rail.

CMA tab on arm closest to the appliance

attaches to end of inner slide rail attached

to appliance.

before installation.

CMA tab on width-adjustment slider

attaches to end of stationary outer slide rail.

Rear of appliance

Installing the Appliance

Reversing the Cable