Cisco UBR7246VXR Manual de instalación - Página 7
Navegue en línea o descargue pdf Manual de instalación para Hardware de red Cisco UBR7246VXR. Cisco UBR7246VXR 28 páginas. Universal broadband router
También para Cisco UBR7246VXR: Manual de inicio rápido (27 páginas), Manual del usuario (7 páginas), Instalación del hardware (25 páginas)
Imprimir página
Overview
This chapter describes the Cisco Cable Clock Card and contains the following sections:
•
•
•
•
•
Clock Card Overview
The Cisco Cable Clock Card (see
to provide a reliable national clock signal to your Cisco uBR7246 VXR universal broadband router. The
primary and secondary DB-15 interfaces on the front of the clock card connect to external T1 clock
signal sources.
When installed in the Cisco uBR7246 VXR chassis, the clock card can propagate a national clock signal
throughout the router's midplane by locking onto an external T1 signal originating over the PSTN,
locking onto a T1 clock signal originating from a port adapter installed in the same chassis, or by
connecting to a Global Positioning System (GPS) receiver generating a T1 clock signal.
Figure 1-1
Do not attempt to remove or install the clock card unless you have first powered off the
Caution
Cisco uBR7246 VXR.
Note
OL-26705-01
Clock Card Overview, page 1-1
Clock Source Overview, page 1-2
Interface Specifications and Pinouts, page 1-3
LEDs, page 1-4
Clock Card Location in the Cisco uBR7246 VXR Chassis, page 1-5
Clock Card—Faceplate View
PRI
ENABLE
The Cisco Cable Clock Card does not support an E1 interface.
Cisco Cable Clock Card Hardware Installation Guide for the Cisco uBR7246VXR Universal Broadband Router
C H A P T E R
Figure
1-1) is a dual-port field-replaceable component that is designed
LOS
ACTIVE
HOLDOVER
FREERUN
1
uBR - CLK-T1
SEC
FAULT
1-1