Cisco UCS B200 M3 Nota de instalación y mantenimiento - Página 34
Navegue en línea o descargue pdf Nota de instalación y mantenimiento para Hardware de red Cisco UCS B200 M3. Cisco UCS B200 M3 36 páginas. Blade server
También para Cisco UCS B200 M3: Manual de instalación (34 páginas), Nota de instalación y mantenimiento (37 páginas), Manual (8 páginas), Manual de actualización (21 páginas), Nota de instalación y mantenimiento (28 páginas)
Imprimir página
Trusted Platform Module
S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m
Trusted Platform Module
The Trusted Platform Module (TPM, Cisco Product ID UCSX-TPM1-001) is a component that can
securely store artifacts used to authenticate the server. These artifacts can include passwords,
certificates, or encryption keys. A TPM can also be used to store platform measurements that help ensure
that the platform remains trustworthy. Authentication (ensuring that the platform can prove that it is what
it claims to be) and attestation (a process helping to prove that a platform is trustworthy and has not been
breached) are necessary steps to ensure safer computing in all environments.
TPM is a factory-configurable option for this server. It is a requirement for the Intel Trusted Execution
Technology (TXT) security feature, which must be enabled in the BIOS settings for a server equipped
with a TPM. A TPM can not be added later by customers, or moved from one server to another.
To enable the TPM:
Enable Quiet Mode in the BIOS policy of the server's Service Profile.
Step 1
Establish a direct connection to the server, either by connecting a keyboard, monitor, and mouse to the
Step 2
front panel using a KVM dongle (N20-BKVM shown in
Reboot the server. Press F2 during reboot to enter the BIOS setup screens.
Step 3
On the Advanced tab, select Trusted Computing and press Enter.
Step 4
Set the TPM Support optionto Enable.
Step 5
Step 6
Press F10 to save and exit. Allow the server to finish booting.
Server Troubleshooting
For general server troubleshooting information, refer to the
of the Cisco UCS Troubleshooting Guide.
Server Configuration
UCS servers are intended to be configured and managed using UCS Manager. Refer to the
Configuration Guide
Server Specifications
Table 8
Specification
Height
Width
Depth
Weight
Cisco UCS B200 M3 Blade Server Installation and Service Note
34
appropriate for your UCS Manager version.
Physical Specifications for the Cisco UCS B200 M3 Blade Server
Figure
2) or by other means.
"Troubleshooting Server
Value
1.95 inches (50 mm)
8.00 inches (203 mm)
24.4 inches (620 mm)
1
15.0 lbs (6.8 kg)
Hardware" chapter
UCS Manager
OL-26624-01