Cisco 6400 Manual de instalación - Página 9
Navegue en línea o descargue pdf Manual de instalación para Servidor Cisco 6400. Cisco 6400 34 páginas. Video surveillance 6400 ip camera
También para Cisco 6400: Ficha de datos (8 páginas)
Chapter 1
Overview
1
2
3
Back View
Figure 1-2
Figure 1-2
1
1
2
3
4
OL-28494-01
Single reflector illuminator
LEDs (SRLEDs)
Varifocal lens
Light sensor
and the table that follows describe the back view of the 6400 IP camera.
Back View of IP Camera
General Purpose I/O (GPIO)
terminal block
SD/SDHC card slot
Video output switch
Focus assist button
IR LEDs that enhance the video image when the IP camera is
running in night mode.
IP camera lens that changes focus as the focal length changes.
Senses the level of ambient light to determine when to switch
day/night mode.
2
3
4
5
6
7
GPIO terminal block that is used to connect external input and
output devices. For more information, see
The IP camera is compliant with Micro SD/SDHC (up to 32GB)
and other preceding standard SD cards.
Switches the video output between to following standards:
NTSC 60Hz (up)—switches camera operation to the
•
National Television System Committee (NTSC) standard.
•
PAL 50Hz (down)—switches camera operation to the
Phase Alternating Line (PAL) standard.
Used in conjunction with an analog display to fine tune the IP
camera focus.
Cisco Video Surveillance 6400 IP Camera Installation Guide
IP Camera Physical Details
Figure
1-3.
1-3