Cisco 7513 Series Manual de instrucciones de sustitución - Página 20

Navegue en línea o descargue pdf Manual de instrucciones de sustitución para Servidor Cisco 7513 Series. Cisco 7513 Series 26 páginas. Chassis replacement
También para Cisco 7513 Series: Manual de inicio rápido (44 páginas), Ficha de datos (11 páginas), Manual (30 páginas), Mantener (20 páginas), Manual de instrucciones de sustitución (19 páginas), Manual de instrucciones de sustitución (22 páginas)

Replacing Power Supplies

To replace the power supply, follow these steps:

Step 1

Figure 15

Step 2

Figure 16

Step 3

20 Cisco 7513, Cisco 7513-MX, and Cisco 7576 Card Cage and Backplane Assembly Replacement Instructions

To replace a power supply, hold it as shown in Figure 15 and slide it into the power supply

bay. Push the supply all the way into the chassis until the sides are ﬂush against the chassis

frame. (See Figure 16.) Do not jam the power supply into the power supply bay.

Supporting the Power Supply (AC-Input Power Supply Shown)

FAN OUT PUT

FAI L

Apply moderate pressure against the power supply faceplate and use a large slotted

screwdriver to tighten the captive screw that secures the power supply to the chassis

frame. (See Figure 16.)

Replacing a Power Supply (AC-Input Power Supplies Shown)

POW ER

Captive screws

Reconnect the power supply cables to the power supply.

•

For DC-input power supplies, refer to the conﬁguration note 1200-Watt DC-Input

Power Supply Replacement Instructions (Publication Number 78-1899-xx) that

shipped with the Cisco 7513, Cisco 7513-MX, or Cisco 7576 chassis equipped with

DC-input power supplies.

•

For AC-input power supplies, refer to the conﬁguration note 1200-Watt AC-Input

Power Supply Replacement Instructions (Publication Number 78-1900-xx) that

shipped with the Cisco 7513, Cisco 7513-MX, or Cisco 7576 chassis equipped with

AC-input power supplies.

POW ER