Cisco AS5300 - Universal Access Server Manual de configuración - Página 14
Navegue en línea o descargue pdf Manual de configuración para Servidor Cisco AS5300 - Universal Access Server. Cisco AS5300 - Universal Access Server 46 páginas. Access server
También para Cisco AS5300 - Universal Access Server: Anexo (10 páginas), Manual de inicio rápido (25 páginas), Manual (21 páginas)
Imprimir página
Task 2—Setting Up Asynchronous Shell Services
Enter the show running command to see the current configuration of all of the Cisco AS5300 T1
Step 3
controllers:
Tips
If you have trouble:
•
•
Step 3—Configuring the Serial Channels to Let Modem Calls Come In
Configure the D channels to allow incoming voice calls to be routed to the Cisco AS5300's integrated
modems. The D channel is the signalling channel that controls the calls coming in on the ISDN B
channels.
Later, in the section "Step 1—Configuring Dial-on-Demand Routing" in Task 4, the D-channel
configuration can be expanded to also accept ISDN synchronous PPP calls from the remote offices.
However, Cisco recommends getting only modem users configured and running at this stage in the
process.
Cisco IOS Dial Services Quick Configuration Guide
2-14
hq-sanjose# show running
Building configuration...
Current configuration:
!
----- snip ----
!
isdn switch-type primary-ni
!
controller T1 0
framing esf
clock source line primary
linecode b8zs
pri-group timeslots 1-24
!
controller T1 1
framing esf
clock source line secondary 1
linecode b8zs
pri-group timeslots 1-24
!
controller T1 2
framing esf
clock source line secondary 2
linecode b8zs
pri-group timeslots 1-24
!
controller T1 3
framing esf
clock source line secondary 3
linecode b8zs
pri-group timeslots 1-24
!
----- snip ----
Make sure the controller reports "up."
Check if errors are reported in the current interval.
Chapter 2
Configuring the Cisco AS5300 Network Access Server