Epson ActionScanner II PC - ActionScanning System II Primeros pasos - Página 8
Navegue en línea o descargue pdf Primeros pasos para Escáner Epson ActionScanner II PC - ActionScanning System II. Epson ActionScanner II PC - ActionScanning System II 27 páginas. Technical brief (scanners)
También para Epson ActionScanner II PC - ActionScanning System II: Especificaciones (6 páginas), Manual (11 páginas)
Imprimir página
1.
Carefully remove the interface card from its packaging,
holding it only by its top edges. Then place it on a flat,
clean surface.
Caution:
Avoid touching the components or the gold contacts on
the interface
electricity.
2.
Locate jumpers Jl and J2 on the interface card, as shown
below.
3.
The settings are printed on the circuit board next to the
jumpers. To change a setting, lift off the jumper cap and
reinstall it over the appropriate pair of pins.
Caution:
Be careful not to bend the jumper pins.
they can be damaged by static
card;
n
5