Epson CX4200 - Stylus Color Inkjet Manual del usuario - Página 15
Navegue en línea o descargue pdf Manual del usuario para Escáner Epson CX4200 - Stylus Color Inkjet. Epson CX4200 - Stylus Color Inkjet 18 páginas. Continuous ink supply system for xm prefilled version with auto reset chips
También para Epson CX4200 - Stylus Color Inkjet: Manual rápido (48 páginas), Manual Start Here (8 páginas), Resumen técnico (6 páginas), Actualización (1 páginas), Instrucciones de instalación (7 páginas)
Imprimir página
Caution:
Do not move the print head by hand; this may damage the Epson
Stylus CX. Always press the
4. Press the B ink button again.
❏ If more than one cartridge is empty or low, the next
cartridge moves to the _ ink out mark.
❏ Once the Epson Stylus CX has identified all of the
empty or low ink cartridges, the print head moves to the
ink cartridge replacement position.
5. Open the cartridge cover.
6. Squeeze the tab at the back of the cartridge and lift it
straight out. Dispose of it carefully. Do not take the used
cartridge apart or try to refill it.
Warning:
If ink gets on your hands, wash them thoroughly with soap and
water. If ink gets into your eyes, flush them immediately with
water.
Epson Stylus CX4200 Series/Epson Stylus CX4800 Series
B
ink button to move it.
7. Before you open the new ink cartridge package, shake it
four or five times. Then remove it from the package.
Caution:
Do not touch the green chip on the front of the cartridge. This can
damage the ink cartridge.
8. Place the new ink cartridge into the cartridge holder and
push it down until it clicks into place.
9. Replace any other cartridges that need to be replaced.
10. Close the ink cartridge cover and press it until it clicks into
place.
5/05
15